Precise forming of Ti60 alloy by superplastic forming /diffusion bonding
Jiang Shaosong, Kang Liangwei, Li Yang
download PDFAbstract. The study investigated the high-temperature tensile behavior of Ti60 alloy at different temperatures (940″℃” to 1040″℃” ) and different strain rates (0.1s-1 to 0.0005s-1). Ti60 exhibited superplasticity with the best deformation temperature ranging from 940″℃” to 960″℃” . The elongation of the samples decreased significantly at the temperatures over 980″℃” due to the growth of grain size. In addition, the study investigated the influence of diffusion bonding temperature and pressure on the microstructure and mechanical properties of the joint. The results showed that there was no microscopic gaps or cracks at the interface of the diffusion bonding joints performed at 2.5MPa, 920″℃” and 2 hours. Thereafter, a four-layer structure of Ti60 alloy was fabricated through the SPF/DB. The component with uniform thickness distribution, high surface quality, high diffusion bonding quality was achieved.
Keywords
Ti60, Diffusion Bonging, Superplastic Forming, Four-Storey Structure, High-Temperature Titanium Alloy
Published online , 6 pages
Copyright © 2023 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Jiang Shaosong, Kang Liangwei, Li Yang, Precise forming of Ti60 alloy by superplastic forming /diffusion bonding, Materials Research Proceedings, Vol. 32, pp 81-86, 2023
DOI: https://doi.org/10.21741/9781644902615-8
The article was published as article 8 of the book Superplasticity in Advanced Materials
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] HUANG L. J., YANG F. Y., HU H. T., et al. TiB whiskers reinforced high temperature titanium Ti60 alloy composites with novel network microstructure, J. Mater Design. 51 (2013) 421-426. https://doi.org/10.1016/j.matdes.2013.04.048
[2] XU Z. Y., CHEN X. Z., ZHOU Z. S., et al. Electrochemical machining of high-temperature titanium alloy Ti60, J. Proc Cirp. 42 (2016) 125-130. https://doi.org/10.1016/j.procir.2016.02.206
[3] SHAO X., GUO X. L., HAN Y. F., et al. Characterization of the diffusion bonding behavior of pure Ti and Ni with different surface roughness during hot pressing, J. Mater Design. 65 (2015) 1001-1010. https://doi.org/10.1016/j.matdes.2014.09.071
[4] JIA W J., ZENG W. D., LIU J. R., et al. Influence of thermal exposure on the tensile properties and microstructures of Ti60 titanium alloy, J. Mat Sci Eng a-Struct. 530 (2011) 511-518. https://doi.org/10.1016/j.msea.2011.10.011
[5] LIU J., TAN M. J., AUE-U-LAN Y., et al. Superplastic-like forming of Ti-6Al-4V alloy, J. Int J Adv Manuf Tech. 69 (2013) 1097-1104. https://doi.org/10.1007/s00170-013-5101-z
[6] Ding Yuan, Shuaiqi Shao, Chunhuan Guo, et al. Grain Refining Of Ti-6al-4v Alloy Fabricated By Laser And Wire Additive Manufacturing Assisted With Ultrasonic Vibration, J. Ultrasonics Sonochemistry. 73 (2021) 105472 https://doi.org/10.1016/j.ultsonch.2021.105472
[7] PENG P., JIANG S., QIN Z., et al. Superplastic Forming and Reaction Diffusion Bonding Process of Hollow Structural Component for Mg-Gd-Y-Zn-Zr Rare Earth Magnesium Alloy, J. Metals. 12 (2022) 1. https://doi.org/10.3390/met12010152
[8] YANG J. L., WANG G. F., JIAO X. Y., et al. High-temperature deformation behavior of the extruded Ti-22Al-25Nb alloy fabricated by powder metallurgy, J. Mater Charact. 137 (2018) 170-179. https://doi.org/10.1016/j.matchar.2018.01.019
[9] WANJARA P., JAHAZI M., MONAJATI H., et al. Hot working behavior of near-α alloy IMI834, J. Materials Science & Engineering A. 396 (2005) 50-60. https://doi.org/10.1016/j.msea.2004.12.005
[10] BIALLAS G., ESSERT M., MAIER H. J., et al. Influence of environment on fatigue mechanisms in high-temperature titanium alloy IMI834, J. Int J Fatigue. 27 (2005) 1485-1493. https://doi.org/10.1016/j.ijfatigue.2005.06.009
[11] GAO X. F., CHEN S. P., DONG F., et al. Diffusion bonding of Ti/Ni under the influence of an electric current: mechanism and bond structure, J. J Mater Sci. 52 (2017) 3535-3544. https://doi.org/10.1007/s10853-016-0648-3
[12] EROGLU M., KHAN T. I., ORHAN N.. Diffusion bonding between Ti-6Al-4V alloy and microduplex stainless steel with copper interlayer, J. Mater Sci Tech-Lond. 18 (2002) 68-72. https://doi.org/10.1179/026708301125000230
[13] JIA W. J., ZENG W. D., ZHOU Y. G., et al. High-temperature deformation behavior of Ti60 titanium alloy, J. Mat Sci Eng a-Struct. 528 (2011) 4068-4074. https://doi.org/10.1016/j.msea.2011.01.113
[14] DENG J., LIN Y. C., LI S. S., et al. Hot tensile deformation and fracture behaviors of AZ31 magnesium alloy, J. Mater Design. 49 (2013) 209-219. https://doi.org/10.1016/j.matdes.2013.01.023
[15] LIN Y. C., DENG J., JIANG Y. Q., et al. Effects of initial delta phase on hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy, J. Mat Sci Eng a-Struct. 598 (2014) 251-262. https://doi.org/10.1016/j.msea.2014.01.029
