In-Situ Analysis of Material Modifications During Deep Rolling by Synchrotron X-Ray Diffraction Experiments
H. Meyer, J. Eppdownload PDF
Abstract. The stress state achieved through elasto-plastic deformation in the deep rolling process has been analyzed with in-situ synchrotron experiment using a roller as tool. For the determination of internal material load and residual stress for specific contact parameters, the material state was analyzed via transmission synchrotron X-ray diffraction for hundreds of measurement positions below the loaded zone. From the individual diffraction rings at each point, the strain and stress fields were reconstructed as 2D mappings of the material modifications. The measured region included material in front of the roller, under the contact point as well as in the already processed near surface region. A 13 mm cylindrical tungsten carbide roller was applied on specimens of AISI 4140 steel in ferritic-pearlitic and quenched and tempered condition to compare the effect of different mechanical properties on the propagation and intensity of the stress and strain fields in the specimen during and after processing. The investigations allowed a comparison of the stress fields for the different material conditions. The results show that the mechanisms of load distribution during the process and the effect of loading stresses on the final material state and on the residual stress distribution are strongly influenced by the initial material state.
Deep Rolling, Synchrotron XRD, In-Situ X-Ray Diffraction, Cold Working, Process Signatures
Published online 9/11/2018, 6 pages
Copyright © 2018 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: H. Meyer, J. Epp, ‘In-Situ Analysis of Material Modifications During Deep Rolling by Synchrotron X-Ray Diffraction Experiments’, Materials Research Proceedings, Vol. 6, pp 27-32, 2018
The article was published as article 5 of the book Residual Stresses 2018
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
 Meyer, D., Kämmler, J. (2016). Surface integrity of AISI 4140 after deep rolling with varied external and internal loads. Procedia CIRP, 45, 363-366. https://doi.org/10.1016/j.procir.2016.02.356
 Nikitin, I., & Altenberger, I. (2007). Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25–600 C. Materials Science and Engineering: A, 465(1-2), 176-182. https://doi.org/10.1016/j.msea.2007.02.004
 Sayahi, M., Sghaier, S., Belhadjsalah, H. (2013). Finite element analysis of ball burnishing process: comparisons between numerical results and experiments. International Journal of Advanced Manufacturing Technology, 67(5-8), 1665-1673. https://doi.org/10.1007/s00170-012-4599-9
 Brinksmeier, E., Klocke, F., Lucca, D. A., Sölter, J., Meyer, D. (2014). Process Signatures–a new approach to solve the inverse surface integrity problem in machining processes. Procedia CIRP, 13, 429-434. https://doi.org/10.1016/j.procir.2014.04.073
 Uhlmann, E., Henze, S., Gerstenberger, R., Brömmelhoff, K., Reimers, W., Fischer, T., Schell, N. (2013). An extended shear angle model derived from in situ strain measurements during orthogonal cutting. Production engineering, 7(4), 401-408. https://doi.org/10.1007/s11740-013-0471-5
 Meyer, H., Epp, J., Zoch, H.W., (2017). In situ X-Ray Diffraction Investigation of Surface Modifications in a Deep Rolling Process under Static Condition. Materials Research Proceedings, 2, 431-436. https://doi.org/10.21741/9781945291173-73
 Noyan, I. C., Cohen, J. B. (2013). Residual stress: measurement by diffraction and interpretation. Springer.
 Ashiotis, G., Deschildre, A., Nawaz, Z., Wright, J. P., Karkoulis, D., Picca, F. E., Kieffer, J. (2015). The fast azimuthal integration Python library: pyFAI. Journal of applied crystallography, 48(2), 510-519. https://doi.org/10.1107/S1600576715004306
 Kuznetsov, V. P., Smolin, I. Y., Dmitriev, A. I., Konovalov, D. A., Makarov, A. V., Kiryakov, A. E., Yurovskikh, A. S. (2013). Finite element simulation of nanostructuring burnishing. Physical Mesomechanics, 16(1), 62-72. https://doi.org/10.1134/S1029959913010074
 Altenberger, I. (2005, September). Deep rolling – the past, the present and the future. Proceedings of 9th international conference on shot peening, 6-9.
 Tomota, Y., Lukáš, P., Neov, D., Harjo, S., & Abe, Y. R. (2003). In situ neutron diffraction during tensile deformation of a ferrite-cementite steel. Acta materialia, 51(3), 805-817. https://doi.org/10.1016/S1359-6454(02)00472-X
 Hoffmann, B., Vöhringer, O., Macherauch, E. (2001). Effect of compressive plastic deformation on mean lattice strains, dislocation densities and flow stresses of martensitically hardened steels. Materials Science and Engineering: A, 319, 299-303. https://doi.org/10.1016/S0921-5093(01)00978-9
 Perenda, J., Trajkovski, J., Žerovnik, A., Prebil, I. (2015). Residual stresses after deep rolling of a torsion bar made from high strength steel. Journal of Materials Processing Technology, 218, 89-98. https://doi.org/10.1016/j.jmatprotec.2014.11.042