Optimization of working conditions and increase of productivity of aluminum hot extrusion press based on finite element analysis

–

Optimization of working conditions and increase of productivity of aluminum hot extrusion press based on finite element analysis

LLORCA-SCHENK Juan, GAYASHAN Lasindu, HEWAGE Praveen

Abstract. The finite element simulation of extrusion allows a precise analysis of the metal flow, but also a detailed evaluation of the various parameters involved in the process: temperatures, pressures, velocities and stresses. The press productivity is directly related to the extrusion velocity. In turn, the maximum achievable extrusion velocity is limited by the exit temperature of the formed profile. Traditionally, most presses set a general billet temperature conservatively to ensure that extrusion does not exceed the pressure and stress limits for most dies. This study aims to provide an additional and non-exclusive methodology to increase productivity based on the correct choice of the billet temperature at the press with the help of a previous analysis by means of finite element simulation. A controlled reduction of the billet temperature makes it possible to increase the extrusion velocity while keeping the outlet temperature, stresses and pressure within the admissible range. The use of finite element simulation avoids iterative processes with several press trials and avoids the risks of excessive press pressure or tool stresses. Thus, it allows a quick determination of the optimum temperature and performs risk-free prediction. To demonstrate the use of the methodology, a billet temperature optimisation for an example die has been developed using the simulation software Qform UK. Together with the theoretical analysis, the results of the real die in the press in collaboration with Alumex PLC (Sri Lanka) are shown. This methodology is shown to be effective and may be of particular interest to companies already using extrusion simulation for other uses, such as die design.

Keywords
Aluminum Extrusion, Productivity Increase, FE Analysis

Published online 4/24/2024, 10 pages
Copyright © 2024 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: LLORCA-SCHENK Juan, GAYASHAN Lasindu, HEWAGE Praveen, Optimization of working conditions and increase of productivity of aluminum hot extrusion press based on finite element analysis, Materials Research Proceedings, Vol. 41, pp 781-790, 2024

DOI: https://doi.org/10.21741/9781644903131-86

The article was published as article 86 of the book Material Forming

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] A. F. M. Arif, A. K. Sheikh, & S. Z. Qamar, A study of die failure mechanisms in aluminum extrusion. Journal of Materials Processing Technology, 134 (2003) 318–328. https://doi.org/10.1016/S0924-0136(02)01116-0
[2] E. Giarmas & D. Tzetzis, Optimization of die design for extrusion of 6xxx series aluminum alloys through finite element analysis: a critical review. International Journal of Advanced Manufacturing Technology, 119 (2022) 5529–5551. https://doi.org/10.1007/s00170-022-08694-3
[3] S. S. Akhtar & A. F. M. Arif, Fatigue failure of extrusion dies: Effect of process parameters and design features on die life. Journal of Failure Analysis and Prevention, 10 (2010). https://doi.org/10.1007/s11668-009-9304-4
[4] S. Z. Qamar, A. K. Sheikh, A. F. M. Arif, M. Younas, & T. Pervez, Monte Carlo simulation of extrusion die life. Journal of Materials Processing Technology, (2008). https://doi.org/10.1016/j.jmatprotec.2007.08.062
[5] S. Z. Qamar, A. F. M. Arif, & A. K. Sheikh, Analysis of product defects in a typical aluminum extrusion facility. Materials and Manufacturing Processes, 19 (2004). https://doi.org/10.1081/AMP-120038650
[6] P. K. Saha, Thermodynamics and tribology in aluminum extrusion. Wear, 218 (1998). https://doi.org/10.1016/S0043-1648(98)00210-5
[7] R. Pelaccia, B. Reggiani, M. Negozio, & L. Donati, Liquid nitrogen in the industrial practice of hot aluminium extrusion: experimental and numerical investigation. International Journal of Advanced Manufacturing Technology, 119 (2022). https://doi.org/10.1007/s00170-021-08422-3
[8] A. Gamberoni, L. Donati, B. Reggiani, M. Haase, L. Tomesani, & A. E. Tekkaya, Industrial Benchmark 2015: Process Monitoring and Analysis of Hollow EN AW-6063 Extruded Profile. Materials Today: Proceedings, 2 (2015) 4714–4725. https://doi.org/10.1016/j.matpr.2015.10.004
[9] H. H. Jo, S. K. Lee, C. S. Jung, & B. M. Kim, A non-steady state FE analysis of Al tubes hot extrusion by a porthole die. Journal of Materials Processing Technology, 173 (2006). https://doi.org/10.1016/j.jmatprotec.2005.03.039
[10] A. Medvedev, A. Bevacqua, A. Molotnikov, R. Axe, & R. Lapovok, Innovative aluminium extrusion: Increased productivity through simulation. Procedia Manuf. (2020). https://doi.org/10.1016/j.promfg.2020.08.085
[11] M. M. Marín, A. M. Camacho, & J. A. Pérez, Influence of the temperature on AA6061 aluminum alloy in a hot extrusion process. Procedia Manufacturing, 13 (2017) 327–334. https://doi.org/10.1016/j.promfg.2017.09.084
[12] N. Biba, S. Stebunov, & A. Lishny, The model for coupled simulation of thin profile extrusion. Key Engineering Materials, 504–506 (2012) 505–510. https://doi.org/10.4028/www.scientific.net/KEM.504-506.505
[13] A. N. Levanov, Improvement of metal forming processes by means of useful effects of plastic friction. Journal of Materials Processing Technology, 72 (1997) 314–316. https://doi.org/10.1016/S0924-0136(97)00191-X
[14] J. Llorca-Schenk, L. Gayashan, & P. Hewage, Dataset for increasing of productivity of aluminum hot extrusion press. Mendeley Data, (2024). https://doi.org/10.17632/chr2mnfh3j.1