A Constructive Analysis on Topology Optimization of Structural Beam Element Using Different Support Condition
J. Jensika Rani, G. Hemalatha, B. Praveen, S. Vincent Sam Jebaduraidownload PDF
Abstract. Topology Optimization (TO) is the method used for maximizing the performance of the system by optimizing material arrangement inside an appropriate topology design operation, for an appropriate set of loads, boundary restraints, and constraints. This helps in the reduction of the materials which in turn reduces the cost of materials. In the current scenario, the price of the ingredients of the traditional concrete is very high. The implementation of TO gives a good impact on the economy of construction, as the materials are optimally placed in the plane of load distribution as per various loading condition. The Evolutionary Structural optimization (ESO) is used for topology optimization. The main merits of implementing topology optimization are that the cost, as well as the weight of the structural member, becomes more effective. Customarily MATLAB software is used for analysis and designing the member. This method will highly useful for the society and the environment.
Topology Optimization, Structural Optimization, ESO, MATLAB
Published online , 8 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: J. Jensika Rani, G. Hemalatha, B. Praveen, S. Vincent Sam Jebadurai, A Constructive Analysis on Topology Optimization of Structural Beam Element Using Different Support Condition, Materials Research Proceedings, Vol. 23, pp 238-245, 2022
The article was published as article 27 of the book Sustainable Materials and Smart Practices
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
 Perle Geoffroy-Donders, Grégoire Allaire, Olivier Pantz, 3-d topology optimization of modulated and oriented periodic microstructures by the homogenization method, (2020). https://doi.org/10.1016/j.jcp.2019.108994
 Zi-Long Zhao, Shiwei Zhou, Kun Cai, Yi Min Xie, A direct approach to controlling the topology in structural optimization, (2020).
 Hao Lia, Zhen Luo, Mi Xiao, Liang Gao, Jie Gao, A new multiscale topology optimization method for multiphase composite structures of frequency response with level sets, (2019), 116 – 144. https://doi.org/10.1016/j.cma.2019.07.020
 Khader M. Hamdia, Hamid Ghasemi, Yakoub Bazi, Haikel AlHichri, Naif Alajlan, Timon Rabczuk, A novel deep learning based method for the computational material design of flexoelectric nanostructures with topology optimization, (2019), 21 – 30. https://doi.org/10.1016/j.finel.2019.07.001
 Willem Roux, Guilian Yi, Imtiaz Gandikota, A spatial kernel approach for topology optimization, (2020).
 Yunfeng Luo, Wenjiong Chen, Shutian Liu, Quhao Li, Yaohui Ma, A discrete-continuous parameterization (DCP) for concurrent optimization of structural topologies and continuous material orientations, (2020).
 Zhan Kang, Jingjie He, Lin Shi, Zhaohui Miao, A method using successive iteration of analysis and design for large-scale topology optimization considering eigenfrequencies, (2020). https://doi.org/10.1016/j.cma.2020.112847
 Shouyu Cai, Weihong Zhang, An adaptive bubble method for structural shape and topology optimization, (2020).
 Yingjun Wang, Zhongyuan Liao, Ming Ye, Yu Zhang, Weihua Li, Zhaohui Xia, An efficient isogeometric topology optimization using multilevel mesh, MGCG and local-update strategy, (2020).
 Ryan Alberdi, Kapil Khandelwal, Bi-material topology optimization for energy dissipation with inertia and material rate effects under finite deformations, (2019). https://doi.org/10.1016/j.finel.2019.06.003
 Hyeong Seok Koh, Jun Hwan Kim, Gil Ho Yoon, Efficient topology optimization of multicomponent structure using substructuring-based model order reduction method, (2020).
 Andrew T. Gaynor, Terrence E. Johnson, Eliminating occluded voids in additive manufacturing design via a projection-based topology optimization scheme, (2019).
 Jackson L. Jewett, Josephine V. Carstensen, Experimental investigation of strut-and-tie layouts in deep RC beams designed with hybrid bi-linear topology optimization, (2019).
 Weisheng Zhang, Dingding Li, Pilseong Kang, Xu Guo, Sung-Kie Youn, Explicit topology optimization using IGA-based moving morphable void (MMV) approach, (2020).
 Tsuyoshi Nomura, Atsushi Kawamoto, Tsuguo Kondoh, Ercan M. Dede, Jaewook Lee, Yuyang Song, Noboru Kikuchi, Inverse design of structure and fiber orientation by means of topology optimization with tensor field variables, (2019). https://doi.org/10.1016/j.compositesb.2019.107187
 Hayoung Chung, Oded Amir, H. Alicia Kim, Level-set topology optimization considering nonlinear thermoelasticity, (2020).
 Yan Zhang, Liang Gao, Mi Xiao, Maximizing natural frequencies of inhomogeneous cellular structures by Kriging-assisted multiscale topology optimization, (2020). https://doi.org/10.1016/j.compstruc.2019.106197
 Zeng Meng, Yongsheng Pang, Yuxue Pu, Xuan Wang, New hybrid reliability-based topology optimization method combining fuzzy and probabilistic models for handling epistemic and aleatory uncertainties, (2020). https://doi.org/10.1016/j.cma.2020.112886
 Quoc Khanh Nguyena, Stefano Serra-Capizzano, Eddie Wadbroa, On using a zero lower bound on the physical density in material distribution topology optimization, (2019).
 Vasileios S. Papapetrou, Chitrang Patel, Ali Y. Tamijani, Stiffness-based optimization framework for the topology and fiber paths of continuous fiber composites (2020). https://doi.org/10.1016/j.compositesb.2019.107681
 Siraj-ul-Islam, Wajid Khan, Baseer Ullah, Zahur Ullah, The localized radial basis functions for parameterized level set based structural optimization, (2020). https://doi.org/10.1016/j.enganabound.2020.01.008
 Jackson L. Jewett, Josephine V. Carstensen, Topology-optimized design, construction and experimental evaluation of concrete beams, (2019).
 Lei Zhao, Bin Xu, Yongsheng Han, Jingdan Xue, Jianhua Rong, Structural topological optimization with dynamic fatigue constraints subject to dynamic random loads, (2019). https://doi.org/10.1016/j.engstruct.2019.110089
 Jong Wook Lee, Jong Jin Kim, Gil Ho Yoon, Stress constraint topology optimization using layerwise theory for composite laminates, (2019).
 Haijun Xi, Lei Wang, Yaru Liu, Uncertainty-oriented topology optimization of interval parametric structures with local stress and displacement reliability constraints, (2020).
 Baoshou Liu, Chao Jiang, Guangyao Li, Xiaodong Huang, Topology optimization of structures considering local material uncertainties in additive manufacturing, (2020).
 Tommaso Pastore, Valentina Mercuri, Costantino Menna, Domenico Asprone, Paola Festa, Ferdinando Auricchio, Topology optimization of stress-constrained structural elements using risk-factor approach, (2019). https://doi.org/10.1016/j.compstruc.2019.106104
 Carl-Johan Thore studied the topology optimization of freely floating elastic continua using the inertia relief method, (2020).
 Hao Deng, Lin Cheng, Xuan Liang, Devlin Hayduke, Albert C. To, Topology optimization for energy dissipation design of lattice structures through snap-through behavior, (2020). https://doi.org/10.1016/j.cma.2019.112641
 Yan Zhang, Mi Xiao, Xiaoyu Zhang, Liang Gao, Topological design of sandwich structures with graded cellular cores by multiscale optimization, (2020). https://doi.org/10.1016/j.cma.2019.112749
 Xianda Xie, Shuting Wang, Manman Xu, Ning Jiang, Yingjun Wang, A hierarchical spline-based isogeometric topology optimization using moving morphable components, (2020).
 Oded Amir, A topology optimization procedure for reinforced concrete structures, (2019).
 Liang Xia, Qi Xia, Xiaodong Huang, Yi Min Xie, Bi-directional Evolutionary Structural Optimization on Advanced Structures and Materials: A Comprehensive Review, (2016).