Improving the Efficiency of Turning Processing of Heat-Resistant Alloys by Introducing Ultrasonic Field Energy into the Cutting Zone

Improving the Efficiency of Turning Processing of Heat-Resistant Alloys by Introducing Ultrasonic Field Energy into the Cutting Zone

Aleksandr Khramov, Maksim Gorchcov, Nguyen Khan Toan, Evgeniy Kiselev

Abstract. Studies have been carried out to assess the effectiveness of dry processing by the current preparations from the heat-resistant alloy CN45MVTUBR with mineral ceramic incisors with the introduction of the ultrasound-field energy treatment zone. It has been established that the use of ULTRASOUND in the rough treatment of mineral ceramic tools without coolant allows to reduce the depth of the defective layer in 1.5 times.

Keywords
Turning, Heat-Resistant Alloys, Cutting Zone, Cutting Tool, Ultrasonic Energy

Published online 1/5/2022, 5 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Aleksandr Khramov, Maksim Gorchcov, Nguyen Khan Toan, Evgeniy Kiselev, Improving the Efficiency of Turning Processing of Heat-Resistant Alloys by Introducing Ultrasonic Field Energy into the Cutting Zone, Materials Research Proceedings, Vol. 21, pp 122-126, 2022

DOI: https://doi.org/10.21741/9781644901755-22

The article was published as article 22 of the book Modern Trends in Manufacturing Technologies and Equipment

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] A.Y. Kachan, V.F. Mozgovoy, S.B. Belikov: Main directions of technology development and metal cutting machines with CNC In:Visnik of dwigunobuding. 2007 №2, pp. 82-85.
[2] Kiselyov E.S.: Modern ultrasonic dimensional technologies of mechanical processing of hard-to-process and composite materials. In: Science-intensive technologies in mechanical engineering 2020. № 9, pp. 33-39. https://doi.org/10.30987/2223-4608-2020-9-33-39
[3] Kiselev E.S., Blagovskiy O.V. Management of the formation of residual stresses in the manufacture of critical / parts: monograph..- St. Petersburg: Lan, 2020, 140 p
[4] Kumabe D.: Vibrational cutting. Translation from yap. S.L. Maslennikova. Edited by I.I. Portnova and V.V. Belov. M.: Mechanical Engineering (1985).
[5] Mikhailov A.N.: Basics of synthesis of functionally oriented technologies. Donetsk: DonNTU (2009).
[6] Nguen Han Toan, Kiselyov E.S.: Heatproof Relaxation of Welding Stresses Openwork Designs of Large Size Ultrasonic Field. Solid State Phenomena. In: Vol. 303 (05). 2020, рр 124-131 (2020). https://doi.org/10.4028/www.scientific.net/SSP.303.104
[7] Nazarov M. V., Savelev K. S. and Kiselev E. S. .Automatically search of a rational cutting mode for milling non-rigid blanks with the specified quality parameters ICMTMTE IOP Conf. Series: Materials Science and Engineering 709(2020) 044069, IOP Publishing. https://doi.org/10.1088/1757-899X/709/4/044069
[8] Nguyen Khanh Toan, Mezin N. N. Study of the Efficiency of Ultrasonic Turning of Heat-Resistant Alloys with Tools from Mineral Ceramics. In: MATEC Web of Conferences 297, 01011(2019). https://doi.org/10.1051/matecconf/201929701011