Surface Treatment Technologies for Boiling Heat Transfer augmentation

Surface Treatment Technologies for Boiling Heat Transfer augmentation

ORMAN Łukasz J., RADEK Norbert, KAPJOR Andrej

download PDF

Abstract. The paper discusses different methods of surface treatment for the production of efficient phase – change heat exchangers. Special focus is given to sintered metal mesh microstructures and laser treatment. The augmentation of boiling heat transfer is described for meshed surfaces due to their best performance characteristics.

Boiling, Laser Treatment, Sintering

Published online 7/16/2018, 4 pages
Copyright © 2018 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: ORMAN Łukasz J., RADEK Norbert, KAPJOR Andrej, ‘Surface Treatment Technologies for Boiling Heat Transfer augmentation’, Materials Research Proceedings, Vol. 5, pp 216-219, 2018


The article was published as article 38 of the book Terotechnology

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

[1] M.E. Poniewski, Wrzenie pęcherzykowe na rozwiniętych mikropowierzchniach, Wydawnictwo Politechniki Świętokrzyskiej, Kielce, 2001.
[2] M. Rannenberg, H. Beer, Heat transfer by evaporation in capillary porous wire mesh structures, Letters in Heat and Mass Transfer, 7 (1980) 425-436.
[3] C. Li, G.P. Peterson, Y. Wang, Evaporation/boiling in thin capillary wicks (I) – wick thickness effects, J. of Heat Transfer, 128 (2006) 1312-1319.
[4] Ł.J. Orman, T. Orzechowski, Analysis of boiling heat transfer on the non-isothermal surface covered with selected wire mesh structures, in: Proc of 7th World Conference on Experimental Heat Transfer ExHFT-7, 2009, 2159-2166.
[5] J. Pietraszek, N. Radek, K. Bartkowiak, Advanced statistical refinement of surface layer’s discretization in the case of electro-spark deposited carbide-ceramic coatings modified by a laser beam, Solid State Phenom. 197 (2013) 198-202.
[6] N. Radek, J. Pietraszek, B. Antoszewski, The average friction coefficient of laser textured surfaces of silicon carbide identified by RSM methodology, Advanced Materials Research, 874 (2014) 29-34.
[7] M. Piasecka, Flow boiling heat transfer in a minichannel with enhanced heating surface, Heat Transfer Engineering, 35, 10 (2014) 903-912.
[8] L. Radziszewski, Intrusive effect of a contact transducer on testing results, Metrology and Measurement Systems, 11 (2004) 31-43.