Superplasticity in Advanced Materials, color print, paperback

$125.00

The 14th International Conference on Superplasticity in Advanced Materials, ICSAM 2023, held on July 10-12th, 2023 in Barcelona, Spain.

Superplasticity in Advanced Materials
ICSAM 2023
Ed. José María Cabrera Marrero
Materials Research Proceedings Volume 32
Publication Date 2023, 390 Pages
ePDF ISBN 9781644902615
print ISBN 9781644902608 (release date August 2023)
DOI: 10.21741/9781644902615

The book presents practical and theoretical works on superplasticity in metals and ceramics, on deformation mechanisms, on processes to obtain large ultrafine-grained structures, on advanced characterization techniques, and on hot deformation of advanced materials. Key papers focus on (1) processing of metallic alloys for achieving exceptional superplastic properties, (2) high-pressure sliding (HPS) processes, (3) in-situ neutron and synchrotron methods, and (4) ultra-severe plastic deformation.

Table of Contents


New developments in the processing of metallic alloys for achieving exceptional superplastic properties
Chuan Ting Wang, Zheng Li, Jing Tao Wang, Terence G. Langdon


Achieving superplasticity in hard-to-deform metallic materials using high-pressure sliding (HPS) process
Zenji Horita, Yoichi Takizawa


In-situ neutron and synchrotron methods for the investigation of plastic deformation and annealing in metals
Klaus-Dieter Liss


Ultra-severe plastic deformation for room-temperature superplasticity and superfunctionality
Kaveh Edalati


An investigation of forming of Ti-6Al-4V at lower temperatures
Hosam Elrakayby, Diego Gonzalez, Paranjayee Mandal, Paul Blackwell


Fabrication and superplastic forming property research of TiB whisker reinforced titanium alloy matrix composite sheet
Mingjie Fu, Fuxin Wang, Zhen Li, Yingying Liu


Superplasticity of Ti-6Al-7Nb alloys with different initial microstructures processed by high-pressure torsion
Kathy González Jiménez, Joaquín E. González Hernández, Jorge M. Cubero-Sesin, Jeremy Barrantes Rodríguez, Zenji Horita


Precise forming of Ti60 alloy by superplastic forming /diffusion bonding
Jiang Shaosong, Kang Liangwei, Li Yang


Numerical simulation and experimental trials on superplastic forming for thin-walled structure of Ti2AINb alloy
Ning Zhang,Yaoqi Wang, Yanhong Mu, Zhen Li


Effect of friction stir forming parameters on mechanical properties and plastic flow of material in the mechanical interlocking of optical fiber and SP-700 superplastic titanium alloy
Hamed Mofidi Tabatabaei, Takahiro Ohashi, Tadashi Nishihara


Mechanical and microstructural analysis of Ti-6Al-4V material in a wide range of superplastic forming conditions
Alexander Sancho, Paranjayee Mandal, Craig Knowles, Diego Gonzalez


Effects of deformation conditions on the superplastic deformation behavior of LZ91 Mg-Li alloy under electric field
Bao Meng, Feng Pan, Jianqiang Yang, Dongsheng Li, Min Wan


Integration of HF and SPF technology in an efficient industrial production flow for high rates aeronautical parts
Yves Marcel, Jeremy Pion, Sharan Raj Rangasamy Mahendren


Investigation of the complexities inherent in manufacturing near-unconstrained superplastic parts by experiments and simulation
Bryan Ferguson, Eric Bol, D.G. Sanders, and M. Ramulu


Formation mechanism and elimination method for surface groove of the hollow lattice structure by superplastic forming
Yanhong Mu, Zhiqiang Li, Bing Zhao, Feng Yang, Ning Zhang, Lihua Du, Yong Li


Study on superplastic gas-bulging properties and microstructure evolution of as-rolled 2A97 Al-Li alloy
Zhang Yanling, Liu Jiajia, Xu Huiyuan, Du Lihua


Superplastic forming process research of front aluminum alloy opening and closing mechanism hatch for multiple units
Ranran Chen, Guangzhong He, Kefei Wang, Guofeng Wang


Low-temperature superplasticity of Si-added medium-Mn steel
Hyun-Bin Jeong, Seok-Won Choi, Seok-Hyeon Kang, Young-Kook Lee


Friction stir processing to improve grain refinement and superplasticity of Al-Mg-Mn-Cr alloy
Anna A. Kishchik, Ahmed O. Mosleh, Olga A. Yakovtseva, Anton D. Kotov, Anastasia V. Mikhaylovskaya


Effect of Co addition on the microstructure evolution and superplastic behavior of Ti-4Al-3Mo-1V-0.1B alloy
Anton D. Kotov, Maria N Postnikova, Ahmed O. Mosleh, Anastasia V. Mikhaylovskaya


Predicting ECAP misorientation evolution and its influence on superplasticity for an Al-Zn-Mg-Cu alloy
Fernando Carreño


Microstructural characteristics, mechanical and corrosion properties of a low-alloyed Mg alloy after different deformation processing
Zahra Abbasi, Jose Maria Cabrera, Ramin Ebrahimi, Erhard Schafler


Effect of severe plastic deformation on microstructure and properties of duplex stainless steel
Claudio Gennari, Luca Pezzato, Nuria Llorca-Isern, Alisiya Biserova-Tahchieva, Irene Calliari


Consolidation of AZ31 magnesium chips using equal channel angular pressing
Majid Al-Maharbi, Almundher Al-Namani


Secondary phase precipitation in ultrafine-grained superduplex stainless steels
Alisiya Biserova-Tahchieva, Núria Llorca-Isern, Jose Maria Cabrera


Grain boundary sliding at low temperatures
Roberto B. Figueiredo


In-situ heating observations on microstructure relaxation of ultrafine-grained high-entropy alloys using neutron diffraction and laser-scanning confocal microscopy
Megumi Kawasaki, Jae-Kyung Han, Suk-Chun Moon, Klaus-Dieter Liss


Hot deformation of ultrafine-grained TiC-reinforced AlCrFeNbMoTiV refractory high entropy alloys
P. Martin, C. Aguilar, B. Ferrari, A.J. Sánchez-Herencia, J.M. Cabrera


Deformation behaviour and microstructural evolution of high-entropy CoFeMnNi alloy at hot deformation condition with low strain rate
Lihua Du, Jiaai Shi, Jiayu Liang, Kailun Zheng


Comparative studies of hyperbolic sine constitutive models for constant pressure superplastic tests
Luis García-Barrachina, Antonio J. Gámez


Warm tensile properties of low-alloy TRIP steel warm-rolled just prior to isothermal holding treatment
Katsumi Hattori, Genta Kojima, Junya Kobayashi, Goroh Itoh, Shigeru Kuramoto, Tomohiko Hojo


Mechanical behavior and microstructure evolution of Ti-6.5Al-2Zr-1Mo-1V/TiB metal-matrix composites during deformation
Maxim Ozerov, Vitaly Sokolovsky, Alexander Galtsev, Nikita Stepanov, Sergey Zherebtsov


Investigation of the influence of kinematic asymmetry on the properties of laminated materials
Olesya D. Biryukova, Alexander M. Pesin, Denis O. Pustovoytov


FEM simulation of dynamic recrystallization during asymmetric hot rolling of high-speed steel M2
Alexander Pesin, Denis Pustovoytov, Ilya Pesin, Hailiang Yu, Puneet Tandon, Harshal Y Shahare, Abhay Kumar Dubey, Leonid Nosov


Improvement in strength and ductility of flame-retardant magnesium alloy through uniaxial hot pressing
Koichi Kitazono, Kotaro Wada


Experimental study of the effect of increasing technological plasticity during asymmetric rolling of aluminum alloys
Anna Kozhemyakina, Alexander Pesin, Denis Pustovoytov, Leonid Nosov, Anna Baryshnikova, Natalia Lokotunina, Dmitry Grachev


Microstructural and corrosion study of a “non-comercial” high manganese steel
Marcos Natan da Silva Lima, Mauro Andres Cerra Florez, Jorge Luiz Cardoso, João Vitor da Silva Pinto, Lucas Moura Farias de Medeiros, Walney Silva Araújo, Hamilton Ferreira Gomes de Abreu


Hot plastic behavior of an ultrafine-grained aluminum alloy fabricated by laser powder bed fusion and equal channel angular pressing
Jairo Alberto Muñoz, Louis Huvelle, Enrique Manuel Huerta, José María Cabrera


Improved stochastic dissimilar diffusion bonding model with experimental validation
Bryan Ferguson, Neha Kulkarni, D.G. Sanders, Eric Bol, M. Ramulu


Development of asymmetric cold rolling technology of high-strength steel grades in order to exclude intermediate annealing operations
Alexander Pesin, Georgy Raab, Alexey Sverchkov, Denis Pustovoytov, Gennady Kornilov, Alexey Bochkarev, Ilya Pesin, Leonid Nosov


Texture and strain rate sensitivity analysis of solid solution and precipitation hardening aluminum alloys processed by repetitive corrugation and straightening
Sergio Elizalde, Marco Ezequiel, Liliana Romero-Resendiz, Jose Maria Cabrera, Gonzalo González


Exploring the effects of repetitive corrugation and strengthening on alloy A5083 using X-ray diffraction techniques
Carlos Alberto De la Trinidad, Ignacio A. Figueroa, José María Cabrera, Gonzalo González