Dislocation Density of GlidCop with Compressive Strain applied at High Temperature
Mutsumi Sano, Sunao Takahashi, Atsuo Watanabe, Ayumi Shiro,
Takahisa Shobu
download PDF
Abstract. Dislocation densities of GlidCop with compressive strain applied at high temperature were examined by X-ray line profile analyses with synchrotron radiation. In order to evaluate the dislocation density, we applied the modified Williamson-Hall and modified Warren-Averbach method. The dislocation densities of GlidCop with compressive strain from 1.1-4 % were in the range of 5.7-8.0×1014 m-2.
Keywords
Dislocation Density, GlidCop, Plastic Strain, Profile Analysis
Published online 4/19/2017, 6 pages
Copyright © 2016 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Mutsumi Sano, Sunao Takahashi, Atsuo Watanabe, Ayumi Shiro,
Takahisa Shobu, ‘Dislocation Density of GlidCop with Compressive Strain applied at High Temperature’, Materials Research Proceedings, Vol. 2, pp 609-614, 2017
DOI: http://dx.doi.org/10.21741/9781945291173-103
The article was published as article 103 of the book Residual Stresses 2016
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] S. Takahashi, M. Sano, T. Mochizuki, A. Watanabe, H. Kitamura, Fatigue life prediction for high-heat-load components made of GlidCop by elastic-plastic analysis, J. Synchrotron Rad. 15 (2008) 144-150. https://doi.org/10.1107/S090904950706565X
[2] M. Sano, S. Takahashi, A. Watanabe, H. Kitamura, K. Kiriyama, T. Shobu, Internal residual strain of GlidCop for materials of the high-heat-load components, Materials Science Forum, 652 (2010) 222-226. https://doi.org/10.4028/www.scientific.net/MSF.652.222
[3] M. Sano, S. Takahashi, A. Watanabe, H. Kitamura, S. Shiro, T. Shobu, Plastic strain of GlidCop for materials of high heat load components, Materials Science Forum, 772 (2014) 123-127. https://doi.org/10.4028/www.scientific.net/MSF.772.123
[4] T. Ungar, A. Borbely, The effect of dislocation contrast on x-ray line broadening: A new approach to line profile analysis, Appl. Phys. Lett. 69 (1996) 3173-3175. https://doi.org/10.1063/1.117951
[5] Y. Noda, Current Status of Crystal Structure Analysis BL02B1 Experimental Station, SPring-8 INFORMATION, Volume 02, No.5 (1997) 17-23.
[6] T. Ungar, I. Dragomir, A. Revesz, A. Borbely, The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice, J. Appl. Cryst. 32 (1999) 992-1002. https://doi.org/10.1107/S0021889899009334
