Prediction of forming limit diagram of automotive sheet metals using a new necking criterion
PHAM Quoc Tuan, ISLAM Md Shafiqul, SIGVANT Mats, CARO Perez Lluis
download PDFAbstract. A theoretical model for predicting the forming limit diagram of sheet metal, named MMFC2, was recently proposed by the authors based on the modified maximum force criterion (MMFC). This study examines the application of MMFC2 for two automotive sheets, DP800 and AA6016, which are widely used in making car body parts. Uniaxial tensile and bulge tests are conducted to calibrate constitutive equations for modeling the tested materials. The developed material models are employed into different frameworks such as MMFC, MMFC2, and Marciniak-Kuczynski (MK) models to forecast the forming limit curve (FLC) of the tested materials. Their predictions are validated by comparing with an experimental one obtained from a series of Nakajima tests. It is found that the derived results of MMFC2 are comparable to that of MK model and agreed reasonably with experimental data. Less computational time is the major advantage of MMFC2 against the MK model.
Keywords
Forming Limit Diagram, DP800, AA6016, MMFC2, MK Method
Published online 4/19/2023, 6 pages
Copyright © 2023 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: PHAM Quoc Tuan, ISLAM Md Shafiqul, SIGVANT Mats, CARO Perez Lluis, Prediction of forming limit diagram of automotive sheet metals using a new necking criterion, Materials Research Proceedings, Vol. 28, pp 705-710, 2023
DOI: https://doi.org/10.21741/9781644902479-76
The article was published as article 76 of the book Material Forming
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 license. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] D. Banabic, Sheet Metal Forming Processes: Constitutive Modelling and Numerical Simulation, Springer Berlin, Heidelberg, 2010. https://doi.org/10.1007/978-3-540-88113-1
[2] H.W. Swift, Plastic instability under plane stress. J. Mech. Phys. Solid. 1 (1952) 1-18. https://doi.org/10.1016/0022-5096(52)90002-1
[3] R. Hill, On discontinuous plastic states, with special reference to localized necking in thin sheets, J. Mech. Phys. Solid. 1 (1952) 19-30. https://doi.org/10.1016/0022-5096(52)90003-3
[4] S. Storen, J. Rice, Localized necking in thin sheets, J. Mech. Phys. Solid. 23 (1975) 421-441. https://doi.org/10.1016/0022-5096(75)90004-6
[5] Z. Marciniak, K. Kuczynski, Limit strains in the processes of stretch-forming sheet metal. Int. J. Mech. Sci. 9 (1967) 609–620. https://doi.org/10.1016/0020-7403(67)90066-5
[6] P. Hora, L. Tong, B. Berisha, Modified maximum force criterion, a model for the theoretical prediction of forming limit curves, Int. J. Mat. Form. 6 (2013) 267-279. https://doi.org/10.1007/s12289-011-1084-1
[7] H. Aretz, Numerical restrictions of the modified maximum force criterion for prediction of forming limits in sheet metal forming, Model. Simu. Mater. Sci. Eng. 12 (2004) 677. https://doi.org/10.1088/0965-0393/12/4/009
[8] Q.T. Pham, B.H. Lee, K.C. Park, Y.S. Kim, Influence of the post-necking prediction of hardening law on the theoretical forming limit curve of aluminium sheets, Int. J. Mech. Sci. 140 (2018) 521-536. https://doi.org/10.1016/j.ijmecsci.2018.02.040
[9] Q.T. Pham, M.S. Islam, M. Sigvant, L.P. Caro, M.-G. Lee and Y.-S. Kim: submitted to International Journal of Solids and Structures (2022).
[10] N. Manopulo, P. Hora, P. Peters, M. Gorji, F. Barlat, An extended modified maximum force criterion for the prediction of localized necking under non-proportional loading, Int. J. Plast. 75 (2015) 189-203. http://doi.org/10.1016%2Fj.ijplas.2015.02.003
[11] A. Barlo, M. Sigvant, B. Endelt, On the Failure Prediction of Dual-Phase Steel and Aluminium Alloys Exposed to Combined Tension and Bending, IOP Conf. Ser.: Mater. Sci. Eng. 651 (2019) 012030. https://doi.org/10.1088/1757-899X/651/1/012030
[12] F. Barlat, J. Brem, J.W. Yoon, K. Chung, R. Dick, D. Lege, F. Pourboghrat, S.-H. Choi, E. Chu, Plane stress yield function for aluminum alloy sheets—part 1: theory, Int. J. Plast. 19 (2003) 1297-1319. https://doi.org/10.1016/S0749-6419(02)00019-0
[13] M.C. Butuc, G. Vincze, The performance of Marciniak – Kuczynski approach on prediction of plastic instability of metals subjected to complex loadings, Numisheet 2018, IOP Publishing, Journal of Physics: Conference Series 1063 (2018) 12061. http://doi.org/10.1088/1742-6596/1063/1/012061
