Performance of Laser Treated Heaters in Pool Boiling
ORMAN Łukasz J., RADEK Norbert and DUDEK Agatadownload PDF
Abstract. The article is focused on the heat transfer phenomenon during the boiling of specimens produced with the laser beam. The study discusses the enhancement of heat flux values, which is possible thanks to the use of surface extension with the laser treatment process. The visualization of the boiling process with the high-speed camera enables us to better understand the phenomenon of boiling. The paper also discusses the application of a selected model to determine heat flux values of the laser-treated sample during the process of distilled water and ethyl alcohol boiling under atmospheric pressure.
Boiling, Heat Exchangers, Laser Treatment
Published online 7/20/2022, 6 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: ORMAN Łukasz J., RADEK Norbert and DUDEK Agata, Performance of Laser Treated Heaters in Pool Boiling, Materials Research Proceedings, Vol. 24, pp 15-20, 2022
The article was published as article 3 of the book Terotechnology XII
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
 M. Piasecka, K. Strąk. Influence of the surface enhancement on the heat transfer in a minichannel, Heat Transfer Engineering 40 (2019) 1162-1175. https://doi.org/10.1080/01457632.2018.1457264
 M. Piasecka, K. Strąk, B. Grabas. Vibration-assisted laser surface texturing and electromachining for the intensification of boiling heat transfer in a minichannel, Archives of Metallurgy and Materials 62 (2017) 1983-1990. https://doi.org/10.1515/amm-2017-0296
 R. Kaniowski, R. Pastuszko. Pool boiling of water on surfaces with open microchannels, Energies 14 (2021) art. 3062. https://doi.org/10.3390/en14113062
 R. Kaniowski, R. Pastuszko. Boiling of FC-72 on surfaces with open copper microchannel, Energies 14 (2021) art. 7283. https://doi.org/10.3390/en14217283
 Ł.J. Orman, N. Radek, J. Pietraszek, M. Szczepaniak. Analysis of enhanced pool boiling heat transfer on laser – textured surfaces, Energies 13 (2020), art. 2700. https://doi.org/10.3390/en13112700
 S. Wciślik. Efficient Stabilization of Mono and Hybrid Nanofluids, Energies 13 (2020) art.3793. https://doi.org/10.3390/en13153793
 S. Wciślik. A simple economic and heat transfer analysis of the nanoparticles use, Chemical Papers 71 (2017) 2395-2401. https://doi.org/10.1007/s11696-017-0234-4
 P. Hrabovsky, P. Nemec, M. Malcho. Compare cooling effect of different working fluid in thermosyphon, EFM14 Int. Conf. on Experimental Fluid Mechanics 2014, Český Krumlov, Czech Republic, EPJ Web of Conferences (2015), art. 02024. https://doi.org/10.1051/epjconf/20159202024
 P. Nemec. Visualization of various working fluids flow regimes in gravity heat pipe, EFM16 Int. Conf. on Experimental Fluid Mechanics 2016, Marienbad, Czech Republic, EPJ Web of Conferences (2017), art. 02079. https://doi.org/10.1051/epjconf/201714302079
 E. Zender-Świercz. Analysis of the impact of the parameters of outside air on the condition of indoor air, Int. Journal of Environmental Science and Technology 14(8) (2017) 1583-1590. https://doi.org/10.1007/s13762-017-1275-5
 M. Krechowicz. Comprehensive risk management in horizontal directional drilling projects, Journal of Construction Engineering and Management 146 (2020) art. 04020034. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001809
 B. Szeląg, J. Drewnowski, G. Łagód, D. Majerek, E. Dacewicz, F. Fatone. Soft sensor application in identification of the activated sludge bulking considering the technological and economical aspects of smart systems functioning, Sensors 20 (2020) art. 1941. https://doi.org/10.3390/s20071941
 B. Szeląg, K. Barbusiński, J. Studziński. Activated sludge process modelling using selected machine learning techniques. Desalination and Water Treatment 17 (2018) 78–87. https://doi.org/10.5004/dwt.2018.22095
 K. Nishikawa, T. Ito, K. Tanaka K. Enhanced heat transfer by nucleate boiling on a sintered metal layer, Heat Transfer – Japanese Research 8 (1979) 65-81.
 N. Radek, J. Pietraszek, A. Gadek-Moszczak, Ł.J. Orman, A. Szczotok. The morphology and mechanical properties of ESD coatings before and after laser beam machining, Materials 13 (2020) art. 2331. https://doi.org/10.3390/ma13102331
 I. Nová, K. Fraňa, T. Lipiński. Monitoring of the Interaction of Aluminum Alloy and Sodium Chloride as the Basis for Ecological Production of Expanded Aluminum. Physics of Metals and Metallography 122 (2021) 1288-1300. https://doi.org/10.1134/S0031918X20140124
 N. Radek, J. Konstanty, J. Pietraszek, Ł.J. Orman, M. Szczepaniak, D. Przestacki. The effect of laser beam processing on the properties of WC-Co coatings deposited on steel. Materials 14 (2021) art. 538. https://doi.org/10.3390/ma14030538
 T. Styrylska, J. Pietraszek. Numerical modeling of non-steady-state temperature-fields with supplementary data. Zeitschrift fur Angewandte Mathematik und Mechanik 72 (1992) T537-T539.
 J. Pietraszek. Response surface methodology at irregular grids based on Voronoi scheme with neural network approximator. 6th Int. Conf. on Neural Networks and Soft Computing JUN 11-15, 2002, Springer, 250-255. https://doi.org/10.1007/978-3-7908-1902-1_35
 J. Pietraszek, E. Skrzypczak-Pietraszek. The uncertainty and robustness of the principal component analysis as a tool for the dimensionality reduction. Solid State Phenom. 235 (2015) 1-8. https://doi.org/10.4028/www.scientific.net/SSP.235.1