Sustainable Buildings – Thermal Sensations Case Study

Sustainable Buildings – Thermal Sensations Case Study

DĘBSKA Luiza and KAPJOR Andrej

download PDF

Abstract. Currently, thermal comfort is becoming one of the most important aspects of human life. It is related to the time people spend in a closed environment. That is why it is so important to study this issue in terms of their actual thermal sensations, in order to better understand and clarify the scope of the relevant parameters, in particular by looking for such data for buildings built with a view to sustainable development. They are to meet all standards, ensuring thermal comfort for people staying in them. The article discusses thermal sensations, thermal preferences, and humidity for the group aged 21-25 in the winter in the Energis building belonging to the Kielce University of Technology. The methods that were used for this purpose include an environmental measure that takes microclimate parameters and questionnaires assessing the conditions in the room under study.

Keywords
Thermal Comfort, Relative Humidity, Thermal Sensations, Sustainable Building, BMI

Published online 7/20/2022, 6 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: DĘBSKA Luiza and KAPJOR Andrej, Sustainable Buildings – Thermal Sensations Case Study, Materials Research Proceedings, Vol. 24, pp 90-95, 2022

DOI: https://doi.org/10.21741/9781644902059-14

The article was published as article 14 of the book Terotechnology XII

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] Z. Fang, S. Zhang, Y. Cheng, A. M. L. Fong, M. O. Oladokun, Z. Lin, H. Wu. Field study on adaptive thermal comfort in typical air conditioned classrooms, Build. Environ. 133 (2018) 73–82. https://doi.org/10.1016/j.buildenv.2018.02.005
[2] J. Jiang, D. Wang, Y. Liu, Y. Di, J. Liu. A field study of adaptive thermal comfort in primary and secondary school classrooms during winter season in Northwest China. Build. Environ. 175 (2020) art. 106802. https://doi.org/10.1016/j.buildenv.2020.106802
[3] L. Dębska, J. Krakowiak. Thermal environment assessment in selected Polish educational buildings. Cold Climate HVAC & Energy (2021). E3S Web of Conferences 246 (2021) art.15004. https://doi.org/10.1051/e3sconf/ 202124615004.
[4] L. Dębska. Assessment of the Indoor Environment in the Intelligent Building. Civ. Environ. Eng. 17 (2021) 572-582. https://doi.org/10.2478/cee-2021-0058
[5] R. de Dear, J. Kim, C. Candido, M. Deuble. Adaptive thermal comfort in Australian school classrooms. Build. Res. Inf. 43 (2015) 383-398. https://doi.org/10.1080/09613218.2015.991627
[6] S.A. Zaki, S.A. Damiati, H.B. Rijal, A. Hagishima, A.A. Razak. Adaptive thermal comfort in university classrooms in Malaysia and Japan. Build. Environ. 122 (2017) 294-306. https://doi.org/10.1016/j.buildenv.2017.06.016
[7] S.J. Talkudar, T.H. Talukdar, M.K. Singh, A. Baten, S. Hossen. Status of thermal comfort in naturally ventilated University classrooms of Bangladesh in hot and humid summer season. J. Build. Eng. 32 (2020) art. 101700. https://doi.org/10.1016/j.jobe.2020.101700
[8] A. Szczotok, J. Pietraszek, N. Radek. Metallographic Study and Repeatability Analysis of γ’ Phase Precipitates in Cored, Thin-Walled Castings Made from IN713C Superalloy. Archives of Metallurgy and Materials 62 (2017) 595-601. https://doi.org/10.1515/amm-2017-0088
[9] Ł.J. Orman, N. Radek, J. Pietraszek, M. Szczepaniak. Analysis of enhanced pool boiling heat transfer on laser – textured surfaces, Energies 13 (2020), art. 2700. https://doi.org/10.3390/en13112700
[10] N. Radek, J. Pietraszek, A. Gądek-Moszczak, Ł.J. Orman, A. Szczotok. The morphology and mechanical properties of ESD coatings before and after laser beam machining, Materials 13 (2020) art. 2331. https://doi.org/10.3390/ma13102331
[11] G. Majewski, Ł.J. Orman, M. Telejko, N. Radek, J. Pietraszek, A. Dudek. Assessment of thermal comfort in the intelligent buildings in view of providing high quality indoor environment, Energies 13 (2020) art. 1973. https://doi.org/10.3390/en13081973
[12] T. Styrylska, J. Pietraszek. Numerical modeling of non-steady-state temperature-fields with supplementary data. Zeitschrift fur Angewandte Mathematik und Mechanik 72 (1992) T537-T539.
[13] M. Zmindak, L. Radziszewski, Z. Pelagic, M. Falat. FEM/BEM techniques for modelling of local fields in contact mechanics, Communications – Scientific Letters of the University of Zilina 17 (2015) 37-46.
[14] I. Nová, K. Fraňa, T. Lipiński. Monitoring of the Interaction of Aluminum Alloy and Sodium Chloride as the Basis for Ecological Production of Expanded Aluminum. Physics of Metals and Metallography 122 (2021) 1288-1300. https://doi.org/10.1134/S0031918X20140124
[15] J. Pietraszek. Response surface methodology at irregular grids based on Voronoi scheme with neural network approximator. 6th Int. Conf. on Neural Networks and Soft Computing JUN 11-15, 2002, Springer, 250-255. https://doi.org/10.1007/978-3-7908-1902-1_35
[16] J. Pietraszek, A. Gadek-Moszczak, N. Radek. The estimation of accuracy for the neural network approximation in the case of sintered metal properties. Studies in Computational Intelligence 513 (2014) 125-134. https://doi.org/10.1007/978-3-319-01787-7_12
[17] J. Pietraszek, R. Dwornicka, A. Szczotok. The bootstrap approach to the statistical significance of parameters in the fixed effects model. ECCOMAS 2016 – Proc. 7th European Congress on Computational Methods in Applied Sciences and Engineering 3, 6061-6068. https://doi.org/10.7712/100016.2240.9206