Laboratory Studies on the Effectiveness of Quarry Dust and Bottom Ash with Treated Marine Clay for Adaptable Flexible Pavement Sub-Grade

Laboratory Studies on the Effectiveness of Quarry Dust and Bottom Ash with Treated Marine Clay for Adaptable Flexible Pavement Sub-Grade

Surya Teja Veeranki, Abhilash Nadakuditi

download PDF

Abstract. The soil found on the sea bed is classed as Marine clay. The major proportion of marine soil is clay so it is generally referred as marine clay (MC). The MC is often weak and lacks stability in heavy loads. This research is concerned with the potential of BA (Bottom ash) and QD (Quarry dust) as soil stabilizers based on resistance enhancement. Soil stabilization points to make strides the geotechnical features of the MC. The engineering properties of MC have been built-up, such as grain size distribution, particle density and soil plasticity. The soil sample was blended and compacted with various quantities of the BA and QD i.e. 2.5%, 5%, 7.5%, 10% 12.5% and 15% for compaction and strength test. The dry-weight method was utilized to prepare the samples. A standard Proctor test was run to determine the stabilized floor OMC and MDD. In the interim, the CBR was conducted to obtain the strength of the stabilized soil. Test results indicate that the MDD of the MC has been improved by 0.19 (g/cc) on addition of 10% BA and it has been improved by 0.246 (g/cc) when 10% QD is added when compared with untreated MC. Laboratory analyses of the cyclic plate load test revealed the ultimate load carrying capacity of the treated MC model flexible pavement has been increased by 349.9% at OMC when compared with untreated MC model flexible pavement.

Keywords
Stabilization, Marine Clay (MC), Bottom Ash (BA), Quarry Dust (QD), OMC, MDD, CBR

Published online , 10 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Surya Teja Veeranki, Abhilash Nadakuditi, Laboratory Studies on the Effectiveness of Quarry Dust and Bottom Ash with Treated Marine Clay for Adaptable Flexible Pavement Sub-Grade, Materials Research Proceedings, Vol. 23, pp 462-471, 2022

DOI: https://doi.org/10.21741/9781644901953-50

The article was published as article 50 of the book Sustainable Materials and Smart Practices

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] Al Quadi, I.L (1994), Laboratory Evaluation of Geo-synthetics Reinforced Pavement Sections, TRR-1739, TRB, 1994, pp. 25-31.
[2] Al-Omari, R.R and Oraibi, W.K (2000), Cyclic behavior of reinforced expansive clay, Jr. of the Japanese Geotechnical Society of Soils and Foundations, Vol. 40, No.2; 2000,pp1-8. https://doi.org/10.3208/sandf.40.2_1
[3] Al-Rawas, N.M (2000), Effect of curing and temperature on lime stabilization, Proc. of Second Australian Conf. on Engineering Materials, Sydney, 1981, pp.611-662.
[4] Ambily, A.P and Gandhi, S.R (2004), Experimental and Theoretical Evaluation of Stone Column in Soft Clay, ICGGE, pp 201-206.
[5] Ambily, A.P and Gandhi, S.R (2004), Experimental and Theoretical Evaluation of Stone Column in Soft Clay, ICGGE, pp 201-206.
[6] AnandJ.Puppala, EkarinWattanasanticharoen and LaureanoR.Hoyos (2003), Ranking of Four Chemical and Mechanical Stabilization Methods to Treat Low-Volume Road Subgrades in Texas, Jr.-Transportation Research Record, Vol. 1819B, 2003, pp. 63-71. https://doi.org/10.3141/1819b-09
[7] Anandarajah. A and Chu. J (1997), Laboratory Determination of shear strength parameters for marine clay, Journal of the Institution of Engineers, Singapore, Vol.14, No.3, pp 39-46.
[8] Arvind Kumar, Baljit Singh Walia and Asheet Bajaj (2007), Influence of Flyash, Lime and Polyester Fibers on Compaction and Strength Properties of Expansive Soil, J.Mat in Civil Engineering, ASCE, Vol. 19, Issue. 3, 2007, pp. 242-248. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:3(242)
[9] Balasubramaniam, A.S., Bergado, D.T., Buensuceso, B.R. and Yang, W.C (1989), Strength and deformation characteristics of lime treated soft clays, Geotechnical Engineering (AIT), 20, 1989, pp. 49-65.