The Structure and Properties of Ceramics, Obtained from Mixtures of the System ZrO2–Al–C
S.I. Dzhelialovdownload PDF
Abstract. The paper presents the results of the analysis of the structures of materials obtained as a result of hot pressing of mixtures of the ZrO2(m) –Al – С system of various compositions. The nature of the change in the composition and physical and mechanical properties of the obtained materials was established depending on the concentration of aluminum and carbon in the initial mixture, as well as the parameters of hot pressing.
Ceramic Materials, Cutting Ceramic, Zirconium Oxide, Aluminum, Carbon, Hardness, Strength, Hot Pressing, Structural Analyses
Published online 1/5/2022, 10 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: S.I. Dzhelialov, The Structure and Properties of Ceramics, Obtained from Mixtures of the System ZrO2–Al–C, Materials Research Proceedings, Vol. 21, pp 450-459, 2022
The article was published as article 74 of the book Modern Trends in Manufacturing Technologies and Equipment
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
 N.Yu. Cherkasova, N.S. Stukacheva, R.I. Kuzmin, E.A. Puris, Development of compositions of aluminum-zirconium ceramics for the manufacture of cutting inserts. / Nanotechnology and Materials Science in Mechanical Engineering. 2019. pp. 347–351.
 N.A. Rejab, AZA Ahmad, M.M. Ratnam, Z.A. Ahmad, The effects of CeO2 addition on the physical, microstructural and mechanical properties of yttria stabilized zirconia toughened alumina (ZTA). Int. Journal of Refractory Metals and Hard Materials 2013; 36; pp. 162–166. https://doi.org/10.1016/j.ijrmhm.2012.08.010
 Liu B., C. Huang, X. Lu, M. Gu, H. Liu, In situ growth of TiC whiskers in Al2O3 matrix for ceramic machine tools. Ceramics International, 2007, Vol. 33, pp. 1475–1480. https://doi.org/10.1016/j.ceramint.2006.05.015
 L. Xikun, Q. Guanming, T. Qu. A12O3–Ti(CN)–Y2O3 composite prepared by HP and its cutting performance. Journal of Rare Earths. Jun. 2007, Vol. 25, pp. 37–41. https://doi.org/10.1016/S1002-0721(07)60519-5
 J. Vleugels, Fabrication, wear and performance of ceramic cutting tools. Advances in Science and Technology, 2006, vol. 45, pp. 1776–1785. https://doi.org/10.4028/3-908158-01-x.1776
 Q. Dong, Q. Tang, W. Li, Al2O3–TiC–ZrO2 nanocomposites fabricated by combustion synthesis followed by hot pressing. Materials Science and Engineering: A. 2008, No 475, pp. 68–75. https://doi.org/10.1016/j.msea.2007.01.158
 S.A. Suvorov, I.A. Turkin, M.A. Delovets, Strength of corundum-zirconium materials of microwave synthesis. Materialovedeniye (Materials Science). 2006, № 6, pp. 36–43.
 D.E. Clark, D.C. Floz, C.E. Folgar, M.M. Mahmoud, Microwave Solution for Ceramic Engineering. The American Ceramic Society. U.S.A., 2006, Р. 494.
 K.Z. Gordashnik, A.A. Lebedev, G.K. Kozin, Trends in the creation of ceramic materials and their application in tool production. Іnstrumentalny svit (Instrumental world). 2007, No. 1 (33), pp. 23–26.
 Zhang Guo-Jun, Yang Jian-Feng, Ando Motohide, Ohji Tatsuki, Reactive hot pressing of alumina-silicon carbide nanocomposites. J. Amer. Ceram. Soc. 2004, № 2, pp. 299–301. https://doi.org/10.1111/j.1551-2916.2004.00299.x
 J. Zhao, The use of ceramic matrix composites for metal cutting applications. Advances in Ceramic Matrix Composites, 2014, 537–569. https://doi.org/10.1533/9780857098825.3.537
 S.I. Dzhelialov, Simulation of the Influence of the Hot-Pressing Parameters and the Mixture Compositions in the ZrO2(m)–Al–C System on the Hardness and the Crack Resistance of Ceramics. Inorganic Materials: Applied Research. 2016. Vol. 2 No. 2. 158–162. https://doi.org/10.1134/S2075113316020076
 S.I. Dzhelyalov, Interaction of components features of the reaction mixture ZrO2(m)-Al-C systems when heated. IOP Conference Series: Materials Science and Engineering, 2020, 889 (1), 012013. https://doi.org/10.1088/1757-899X/889/1/012013
 S.N. Dub, A.L. Maistrenko, A.A. Isakov, Peculiarities of Ceramic Crack Resistance Measurement by Indentation Method. Zavodskaya laboratoriya (Factory laboratory), 1993, No. 4, pp. 58–60.