Forming of Composite Cutting Layer on Tool Steel by Heat Treatment of CVD Coatings
Irina Belashova, Larisa Petrova, Peter Demin, Mikhail Prokofyev
download PDFAbstract. СVD chromium coatings are evaporated on steel substrate from chrome-organic compounds. For crystallization with forming of nano-particles of chromium carbides, subsequent heating (annealing) of tool steel with hybrid coatings is carrying out. Significant increase of micro-hardness of the coating up to 27000 MPa is observed due to the dispersion strengthening. Optimal annealing parameters (temperature and duration) are determined, which maximally strengthen the coatings and increase their adhesion to the steel substrate.
Keywords
CVD, Coatings, Composite Layer, Heat Treatment, Chromium Carbides
Published online 1/5/2022, 5 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: Irina Belashova, Larisa Petrova, Peter Demin, Mikhail Prokofyev, Forming of Composite Cutting Layer on Tool Steel by Heat Treatment of CVD Coatings, Materials Research Proceedings, Vol. 21, pp 199-203, 2022
DOI: https://doi.org/10.21741/9781644901755-35
The article was published as article 35 of the book Modern Trends in Manufacturing Technologies and Equipment
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
References
[1] M. Diesselberg, H.R. Stock, P. Mayr Friction and wear behaviour of PVD chromium nitride supported carbon coatings/ Surface and Coatings Technology. 2004. Т. 188-189. № 1-3 SPEC.ISS. С. pp. 612-616. https://doi.org/10.1016/j.surfcoat.2004.07.023
[2] L.S. Kremnev, A.K. Onegina, L.A. Vinogradova, I.Yu Sapronov. Special features of the composition, structure and properties of high-speed steels for cutting tools with ion-plasma coatings based on titanium nitride, Metal Science and Heat Treatment, 2012. Т. 54. № 1-2. pp. 3-7. https://doi.org/10.1007/s11041-012-9446-y
[3] V.I. Yurshev, R.I. Mukatdarov, I.V. Yurshev Surface hardening of tools by depositing a pyrolytic chromium carbide coating, Metal Science and Heat Treatment. 2015. Т. 57. № 1. pp. 107-111. https://doi.org/10.1007/s11041-015-9845-y
[4] T.A. Tabaza, O.T. Tabaza, A. Al-Sakarneh CVD technology for preparing chromium oxide coatings, study of the kinetics of growth of coatings, Key Engineering Materials. 2018. Т. 765 KEM. С. pp.193-198. https://doi.org/10.4028/www.scientific.net/KEM.765.193
[5] L.L. Ivanov Development of strengthening technology for cutting tools by deposition of pyrolitic chromium coatings, PhD Theses, Moscow, MADI, 1988. 242
[6] A. Vereschaka, A. Aksenenko, S. Shevchenko, et al. Effect of adhesion and tribological properties of modified composite nano-structured multi-layer nitride coatings on WC-Co tools life/Tribology International. 2018. Т. 128. pp. 313-327. https://doi.org/10.1016/j.triboint.2018.07.039
[7] X. Pang, K. Gao, F. Luo, H. Yang, L. Qiao, Y. Wang, A.A. Volinsky Annealing effects on microstructure and mechanical properties of chromium oxide coatings, Thin Solid Films. 2008. Т. 516. № 15. С. pp. 4685-4689. https://doi.org/10.1016/j.tsf.2007.08.083
[8] O.V. Somov, V.A. Pashkin, S.V. Savushkina, B.L. Krit Pyrolytic chromium carbide coatings on steel: effect of annealing on morphology and elemental composition,Surface Engineering and Applied Electrochemistry. 2020. Т. 56. № 2. С. pp.140-146. https://doi.org/10.3103/S1068375520020179
[9] L.G. Petrova, P.E. Demin, G.Y. Timofeeva, A.V. Kosachev, V.D. Aleksandrov Influence of nitriding on the wear resistance and adhesion of zinc coatings on steel, Russian Engineering Research. 2019. Т. 39. № 8. С. pp.696-698. https://doi.org/10.3103/S1068798X1908015X
[10] I.S. Belashova, L.G. Petrova Dispersion Hardening of Amorphous Chromium Coatings by Crystallized Nano-Particles of Carbides , European Conference of Heat Treatment and 21st IFHTSE Congress, May 2014, Munich, Germany, pp..505-510
