Investigation of the Physical and Mechanical Properties of ABS Plastic for the Additive FDM Process in the Manufacture of Models for Experiments in Wind Tunnels

Investigation of the Physical and Mechanical Properties of ABS Plastic for the Additive FDM Process in the Manufacture of Models for Experiments in Wind Tunnels

Alexander Volkhonsky, Kirill Dudkov, Reza Norollahisomarin

download PDF

Abstract. Work has been carried out to determine the physical and mechanical properties of ABS plastics for the manufacture of aerodynamic models using the additive technology of layer-by-layer synthesis FDM for testing in wind tunnels. The samples were tested at normal and negative temperatures. The features of the structure of the samples and the features of their destruction are revealed. The possibility of using ABS plastic for the manufacture of various models used in experiments in wind tunnels is evaluated.

Keywords
Additive Technologies, FDM Layer-By-Layer Synthesis Technologies, Layer-By-Layer Overlay of Molten Polymer Filament, 3D Printer, ABS Plastic, Physical and Mechanical Properties, Sample, Tests, Temperature, Fracture, Models for Experiments in Wind Tunnels

Published online 1/5/2022, 7 pages
Copyright © 2022 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Alexander Volkhonsky, Kirill Dudkov, Reza Norollahisomarin, Investigation of the Physical and Mechanical Properties of ABS Plastic for the Additive FDM Process in the Manufacture of Models for Experiments in Wind Tunnels, Materials Research Proceedings, Vol. 21, pp 133-139, 2022

DOI: https://doi.org/10.21741/9781644901755-24

The article was published as article 24 of the book Modern Trends in Manufacturing Technologies and Equipment

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] Volkhonsky, A.E., Gudkov, K.V. Methods of manufacturing prototypes and parts of aggregates of various industrial products using additive technologies. // Educational Technologies, No.1, 2014, pp. 127–143.
[2] Panferova, E.A., Strukov, A.N., Strukova, A.V., Mishchenko, V.Yu. Methods of prototyping products in the aerospace industry and the equipment used. // Flight, 2013, No. 7. pp. 29–33.
[3] Volkhonsky, A.E., Dudkov, K.V. Manufacturing of “pad” type parts by FDM prototyping. // Polymer Materials, No.3 (178), 2014. pp. 42–45.
[4] Astapov, V.Yu., Khoroshko, L.L., Giordani, M.S., Khoroshko, A.L. CAD in modeling the modes of technological processes for the production of structural elements of aircraft // Proceedings of MAI. 2016. No. 87. URL: http://trudymai.ru/published.php?ID=69638
[5] Laboratory of three-dimensional printing. [Electronic document] – Access mode: http://www.lab3dprint.ru/support/425-abs-vs-pla.
[6] MakerBot Replicator+3D printer. [Electronic document] – Access mode: https:/www.makerbot-gr/shop-makerbot-products/makerbot–replivator-2x-experimental-3d-printer/