Experimental Study of Photocatalytic Effect on Paver Blocks

Experimental Study of Photocatalytic Effect on Paver Blocks

P. Jeganmurugan, A. Sree Rameswari, N. Anuja, V. Sherin

download PDF

Abstract.The increasing population and massive use of vehicles caused the atmospheric air to be more polluted and its effect on human beings is increasing all over the world and hence the introduction of pollution controlling paver blocks can helps in absorbing the vehicles pollution. From this paver block the venture is being made to reduce the pollution using titanium oxide and other chemicals by photocatalytic method. The titanium dioxide absorbs pollutions by the reaction with UV radiation titanium dioxide power is applied in three different methods on the paver blocks in order to find the most effective pollution absorbing capacity of the paver blocks.

Keywords
Paver Block, Titanium Dioxide, UV Radiation, Photocatalytic Effect

Published online 8/15/2021, 8 pages
Copyright © 2021 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: P. Jeganmurugan, A. Sree Rameswari, N. Anuja, V. Sherin, Experimental Study of Photocatalytic Effect on Paver Blocks, Materials Research Proceedings, Vol. 19, pp 36-43, 2021

DOI: https://doi.org/10.21741/9781644901618-5

The article was published as article 5 of the book Recent Advancements in Geotechnical Engineering

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] Aniket Pisal, Akshay Jambhale, Sanket Gurav, Anandrao Jagtap, Rahul Mardhekar (2017), Eco Sensitivity Of Paving Block By Using Titanium Di-Oxide.
[2] Poonam Sharma, Ramesh Kumar Batra (2015), Cement concrete paver blocks for rural roads.
[3] Elia Boonen* and Anne Beeldens (2014), Recent Photocatalytic Applications for Air Purification in Belgium. https://doi.org/10.3390/coatings4030553
[4] Marwa M. Hassan, Heather Dylla, Louay N. Mohammad, and Tyson Rupnow (2012), Methods for the Application of Titanium Dioxide Coatings to ConcretePavement.
[5] Gian luca Guerrini, Anne Beeldens (2012), Environmental benefits of innovative photocatalytic cementitious road materials.
[6] Shihui Shen, Maria Burton, Bertram Jobson, and Liv Haselbach (2011), Pervious Concrete with Titanium Dioxide as a Photocatalyst Compound for a 1 Greener Urban Road Environment. https://doi.org/10.1016/j.conbuildmat.2012.04.097
[7] Lu Yang, Amer Hakki (2008), photocatalysis efficiency in concrete technology:The effect of photocatalysis placement.
[8] Anne Beeldens (2006), Environmental friendly concrete pavement blocks: air purification in the centre of Antwerp
[9] http://pubchem.ncbi.nlm.gov/compound/titanium_dioxide (Properties of titanium dioxide)
[10] http://pubchem.ncbi.nlm.gov/compound/zinc_oxide (Properties of zinc oxide)respectively