The Influence of Pulse Current Frequency on Selected Aspects of Heat Transfer during GTA Welding of 321 Steel
OSTROMĘCKA Małgorzata, KOLASA Andrzej and CZARNECKI Marcindownload PDF
Abstract: Heat input is one of the parameters describing the arc welding process shown in the welding procedure specification. However, there is a strong need to precise its determination particularly when welding with arc pulsation. The paper presents an experiment illustrating the influence of the pulsed current frequency on heat transfer results when welding 321 steel with the GTAW method.
GTAW, Heat Input, Welding Current, Arc Voltage, Pulsation Frequency
Published online , 7 pages
Copyright © 2020 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA
Citation: OSTROMĘCKA Małgorzata, KOLASA Andrzej and CZARNECKI Marcin, The Influence of Pulse Current Frequency on Selected Aspects of Heat Transfer during GTA Welding of 321 Steel, Materials Research Proceedings, Vol. 17, pp 251-257, 2020
The article was published as article 37 of the book Terotechnology XI
Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
 P. Cegielski, A. Kolasa, M. Kuczyński, R. Rostkowska, Some aspects of monitoring and measurements during arc welding, Welding Technology Rev. 88 (12) (2016) 43-50. https://doi.org/10.26628/ps.v88i12.719
 LEB2/2010 Lincoln Electric
 Welding Handbook vol.4. Materials and applications – Part 2.1998. Chapter 5 pp. 233-332
 P. Cegielski, Ł. Bugyi, Selected aspects of welding defects identification in MIG/MAG arc welding, Welding Technology Rev. 89 (6) (2017) 30-35. https://doi.org/10.26628/ps.v89i6.784
 W. H. Kim, S. J. Na, Heat and fluid flow in pulsed current GTA weld pool, Int. J. Heat Transf. 41 (1998) 3213-3227. https://doi.org/10.1016/S0017-9310(98)00052-0
 H. G. Fan, S-J. Na and Y. W. Shiz, Mathematical model of arc in pulsed current gas tungsten arc welding, J. Phys. D: Appl. Phys. 30 (1997) 94–102. https://doi.org/10.1088/0022-3727/30/1/012
 PN-EN 1011-1: 2009 Spawanie – Zalecenia dotyczące spawania metali – Część 1: Ogólne wytyczne dotyczące spawania łukowego.
 K. Wojsyk, M. Macherzyński, Determination of Welding Linear Energy by Measuring Cross-Sectional Areas of Welds, Biul. Inst. Spaw. 60 (5) (2016) 83-89. https://doi.org/10.17729/ebis.2016.5/11
 K. Wojsyk, M. Macherzyński, R. Lis, Evaluation of the amount of heat introduced into the welds and padding welds by means of their transverse fields measurement in conventional and hybrid welding processes, Welding Technology Rev.89 (10) (2017) 67-82.
 A. Klimpel, Technologia spawania i cięcia metali, Gliwice, Politechnika Śląska, 1997.