Strength Testing of a Composite Mounting Frame for a Multi Sensor Detection System

Strength Testing of a Composite Mounting Frame for a Multi Sensor Detection System

KRYSIAK Piotr, SZCZEPANIAK Marcin, WOJCIESZYŃSKA Patrycja and JASIŃSKI Wiesław

Abstract. The work concerns the design and implementation of a support frame for a multi-sensor detection system and conducting strength tests on it. The system consists of GPR, a metal detector and a non-linear junction detector, so it is vital that the support structure be made of a dielectric material. A commercial frame made of glass fiber reinforced polyester (GFRP) profiles was used to construct the frame. After the system was completed, strength tests were carried out under field conditions for the most adverse load conditions.

Keywords
Strength Testing, Strain Gauge Measurements, Glass Fibre-Reinforced Polymer Composites

Published online , 6 pages
Copyright © 2020 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: KRYSIAK Piotr, SZCZEPANIAK Marcin, WOJCIESZYŃSKA Patrycja and JASIŃSKI Wiesław, Strength Testing of a Composite Mounting Frame for a Multi Sensor Detection System, Materials Research Proceedings, Vol. 17, pp 165-170, 2020

DOI: https://doi.org/10.21741/9781644901038-25

The article was published as article 25 of the book Terotechnology XI

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

References
[1] P. Krysiak, A. Czulak, R. Rybczyński, W. Hufenbach, Dobór elementu układu wieloczłonowego z materiału kompozytowego, in: Polimery i Kompozyty Konstrukcyjne, G. Wróbla (ed.). Cieszyn, Logos Press, 2011, 234-241.
[2] P. Krysiak, A. Błachut, P. Gąsior, J. Kaleta, Influence of fiber type and the layer thickness on the stress distribution in composite pipe, Interdisciplinary Journal of Engineering Sciences 2 (1) (2014) 17-20.
[3] P. Krysiak, J. Kaleta, P. Gąsior, A. Błachut, R. Rybczyński, Identification of strains in a multilayer composite pipe, Journal of Science of the Military Academy of Land Forces 49 (4) (2017) 186. https://doi.org/10.5604/01.3001.0010.7233
[4] Z. Orłoś, Doświadczalna analiza odkształceń i naprężeń, Warszawa, PWN, 1977.
[5] Information contained on http://www.fibrolux.com