Shaping of Non-classical Cogbelt Pulleys using Selected Methods of Erosion Blasting

Shaping of Non-classical Cogbelt Pulleys using Selected Methods of Erosion Blasting


download PDF

Abstract. This paper presents the possibility of shaping the envelope of non-classical cogbelt pulleys used in non-parallel cogbelt transmissions. A characteristic feature of these transmissions is the periodic change of kinematic features due to the use of eccentrically mounted ellipsoidal, oval or round pulleys. The use of envelope or shape machining methods for such cogbelt pulleys creates the need to develop complex machine tool control programs. The author suggests using selected methods of erosion blasting for this purpose.

Non-Classical Cogbelt Pulleys, Erosion Blasting, Execution Errors

Published online , 6 pages
Copyright © 2020 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: Piotr KRAWIEC, Shaping of Non-classical Cogbelt Pulleys using Selected Methods of Erosion Blasting, Materials Research Proceedings, Vol. 17, pp 94-99, 2020


The article was published as article 14 of the book Terotechnology XI

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

[1] M. Kujawski, P.Krawiec, Analysis of Generation Capabilities of Noncircular Cog belt Pulleys on the Example of a Gear with an Elliptical Pitch Line. Journal of Manufacturing Science and Engineering-Transactions of the ASME 133(5) (2011) 051006.
[2] P. Krawiec, M. Grzelka, J. Kroczak, G, Domek, A.Kołodziej, A proposal of measurement methodology and assessment of manufacturing methods of nontypical cog belt pulleys, Measurement 132 (2019) 182-190.
[3] P.Krawiec, K.Waluś, Ł.Warguła, J.Adamiec, Wear evaluation of elements of V-belt transmission with the application of optical microscope, MATEC Web of Conf. 157 (2018) art. 01009.
[4] P.Krawiec Analysis of selected dynamic features of a two-wheeled transmission system, Journal of Theoretical and Applied Mechanics 55(2) (2017) 461-467.
[5] K. Gawdzińska, L. Chybowski, W. Przetakiewicz, R. Laskowski, Application of FMEA in the Quality Estimation of Metal Matrix Composite Castings Produced by Squeeze Infiltration. Arch. Metall. Mater. 62 (4) (2017) 2171-2182.
[6] Z. Ignaszak, P. Popielarski, J. Hajkowski, E. Codina, Methodology of comparative validation of selected foundry simulation codes, Arch. Foundry Eng. 15(4) (2015) 37-44.
[7] Z. Ignaszak, P. Popielarski, J. Hajkowski, Sensitivity of Models Applied in Selected Simulation Systems with Respect to Database Quality for Resolving of Casting Problems, Defect and Diffusion Forum 336 (2013) 135-146.
[8] Ratajczak M., Ptak M., Chybowski L., Gawdzińska K., Będziński R., Material and Structural Modeling Aspects of Brain Tissue Deformation under Dynamic Loads. Materials 12(2) (2019) 271:1-14.
[9] K. Gawdzińska, K. Bryll,D. Nagolska, Influence of heat treatment on abrasive wear resistance of silumin matrix composite castings, Arch. Metall. Mater. 61(1) 177-182.
[10] Felusiak, T. Chwalczuk, M. Wiciak, Surface Roughness Characterization of Inconel 718 after Laser Assisted Turning, MATEC Web of Conf. 237 (2018) art. 01004.
[11] M. Wiciak, T. Chwalczuk, A. Felusiak, Experimental Investigation and Performance Analysis of Ceramic Inserts in Laser Assisted Turning of Waspaloy, MATEC Web of Conf. 237 (2018) art. 0100.
[12] T. Chwalczuk, D. Przestacki, P. Szablewski, A. Felusiak, Microstructure characterisation of Inconel 718 after laser assisted turning, MATEC Web of Conf. 188 (2018) art. 02004.
[13] S. Wojciechowski, P. Twardowski, T. Chwalczuk, Surface roughness analysis after machining of direct laser deposited tungsten carbide, Journal of Physics: Conference Series 483 (2014) art. 012018.
[14] M. Kawalec, D. Przestacki, K. Bartkowiak, M. Jankowiak, Laser assisted machining of aluminum composite reinforced by SiC particle. (2008) ICALEO 2008 27th Int. Congress on Applications of Lasers and Electro-Optics, 895-900.
[15] D. Przestacki, R. Majchrowski, L. Marciniak-Podsadna, Experimental research of surface roughness and surface texture after laser cladding, App. Surf. Sci. 388 (2016) 420-423.
[16] S. Wojciechowski, D. Przestacki, T. Chwalczuk , The evaluation of surface integrity during machining of inconel 718 with various laser assistance strategies, MATEC Web of Conf. 136 (2017) art. 01006.
[17] M. Kukliński, A. Bartkowska, D. Przestacki, Investigation of laser heat treated Monel 400, MATEC Web of Conf. 219 (2018) art. 02005.
[18] N. Radek, K. Bartkowiak, Laser treatment of electro-spark coatings deposited in the carbon steel substrate with using nanostructured WC-Cu electrodes. Physics Procedia. 39 (2012) 295-301.
[19] R. Dwornicka, N. Radek, M. Krawczyk, P. Osocha, J. Pobedza, The laser textured surfaces of the silicon carbide analyzed with the bootstrapped tribology model. METAL 2017 26th Int. Conf. on Metallurgy and Materials (2017), Ostrava, Tanger 1252-1257.
[20] N. Radek, A. Szczotok, A. Gadek-Moszczak, R. Dwornicka, J. Broncek, J. Pietraszek, The impact of laser processing parameters on the properties of electro-spark deposited coatings. Arch. Metall. Mater. 63 (2018) 809-816.
[21] M. Domagala, H. Momein, J. Domagala-Fabis, G. Filo, D. Kwiatkowski, Simulation of cavitation erosion in a hydraulic valve. Materials Research Proceedings 5 (2018) 1-6.
[22] L. Chybowski, K. Gawdzinska, O. Slesicki, K. Patejuk, G. Nowosad, An engine room simulator as an educational tool for marine engineers relating to explosion and fire prevention of marine diesel engines. Scientific Journals of the Maritime University of Szczecin 43 (2015) 15-21.
[23] L. Wojnar, A. Gadek-Moszczak, J. Pietraszek, On the role of histomorphometric (stereological) microstructure parameters in the prediction of vertebrae compression strength. Image Analysis and Stereology 38 (2019) 63-73.