Logistic Controlling Processes and Quality Issues in a Cast Iron Foundry

Logistic Controlling Processes and Quality Issues in a Cast Iron Foundry

ULEWICZ Robert, MAZUR Magdalena, KNOP Krzysztof and DWORNICKA Renata

download PDF

Abstract. The article shows issues related to the creation and implementation of added value through logistics and processing in a cast iron foundry. The possibilities of improving the casting production systems through the assessment of their labor consumption and the analysis of manufacturing prime costs were discussed. In order to increase the efficiency of iron foundry management, quality control was introduced. The comparative method was used in the studies presented here. Two areas of organization management were compared: the quality management area and the financial management area. The purpose of this comparison is to find common features when supervising tasks in both zones.

Iron Foundry, Quality, Process, Logistics, Controlling, Work Ergonomics

Published online , 7 pages
Copyright © 2020 by the author(s)
Published under license by Materials Research Forum LLC., Millersville PA, USA

Citation: ULEWICZ Robert, MAZUR Magdalena, KNOP Krzysztof and DWORNICKA Renata, Logistic Controlling Processes and Quality Issues in a Cast Iron Foundry, Materials Research Proceedings, Vol. 17, pp 65-71, 2020

DOI: https://doi.org/10.21741/9781644901038-10

The article was published as article 10 of the book Terotechnology XI

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

[1] R. Wolniak, Operation manager and its role in the enterprise, Production Engineering Archives 24 (2019) 1-4. https://doi.org/10.30657/pea.2019.24.01
[2] A. Pacana, K. Czerwińska, Analysis management instruments of the causes of control panel inconsistencies in the gravitational casting process by means of quality, Production Engineering Archives 25 (2019) 12-16. https://doi.org/10.30657/pea.2019.25.03
[3] B. Jereb, J. Rosak-Szyrocka, Quality of investments in logistics, Production Engineering Archives 2 (2014) 6-8. https://doi.org/10.30657/pea.2014.02.02
[4] M. Nowicka-Skowron, R. Ulewicz, Quality management in logistics processes in metal branch, METAL 2015 24th Int. Conf. on Metallurgy and Materials, Ostrava, Tanger, 2015, 1707-1712.
[5] R. Ulewicz (eds.), Narzędzia jakości w praktyce. Poradnik dla biznesu, Czestochowa, SMJiP, 2018.
[6] P. Nyhuis, H.P. Wiendahl, Fundamentals of production logistic – theory, tools and applications. Berlin, Springer, 2009. https://doi.org/10.1007/978-3-540-34211-3
[7] H. Kerzner, Project management best practices: achieving global excellence. New York, Wiley, 2010.
[8] S. Kukla, Costs analysis of iron casts manufacturing. Arch. Foundry Eng. 12 (2012), 45-48. https://doi.org/10.2478/v10266-012-0034-9
[9] A. S. Polak. Quality controlling – trends. Problemy Jakosci 2 (2004), 18-21.
[10] P. Walczak, A. Sobczyk, Simulation of water hydraulic control system of Francis turbine. Proc. 8th FPNI Ph.D Symposium on Fluid Power, 2014, art. V001T04A001. https://doi.org/10.1115/FPNI2014-7814
[11] M. Domagala, H. Momein, J. Domagala-Fabis, G. Filo, D. Kwiatkowski, Simulation of cavitation erosion in a hydraulic valve. Materials Research Proceedings 5 (2018) 1-6.
[12] M. Domagala, H. Momein, J. Domagala-Fabis, G. Filo, M. Krawczyk, J. Rajda, Simulation of particle erosion in a hydraulic valve. Materials Research Proceedings 5 (2018) 17-24.
[13] P. Krawiec, A. Marlewski, Spline description of non-typical gears for belt transmissions. J. Theor. Appl. Mech. 49 (2011) 355-367.
[14] T. Lipinski, D. Karpisz, Corrosion rate of 1.4152 stainless steel in a hot nitrate acid. METAL 2019: 28th Int. Conf. on Metallurgy and Materials, Ostrava, TANGER, 2019, 1086-1091. https://doi.org/10.37904/metal.2019.911
[15] T. Pieczonka, J. Kazior, A. Szewczyk-Nykiel, M. Hebda, M. Nykiel, Effect of atmosphere on sintering of Alumix 431D powder. Powder Metall. 55 (2012) 354-360. https://doi.org/10.1179/1743290112Y.0000000015
[16] J. Pietraszek, A. Gadek-Moszczak, The Smooth Bootstrap Approach to the Distribution of a Shape in the Ferritic Stainless Steel AISI 434L Powders. Solid State Phenomena 197 (2012) 162-167. https://doi.org/10.4028/www.scientific.net/SSP.197.162
[17] D. Przestacki, R. Majchrowski, L. Marciniak-Podsadna, Experimental research of surface roughness and surface texture after laser cladding. App. Surf. Sci. 388 (2016) 420-423. https://doi.org/10.1016/j.apsusc.2015.12.093
[18] A. Pacana, L. Bednarova, I. Liberko, A. Wozny, Effect of selected production factors of the stretch film on its extensibility. Przem. Chem. 93 (2014) 1139-1140.
[19] L. Wojnar, A. Gadek-Moszczak, J. Pietraszek, On the role of histomorphometric (stereological) microstructure parameters in the prediction of vertebrae compression strength. Image Analysis and Stereology 38 (2019) 63-73. https://doi.org/10.5566/ias.2028
[20] E. Skrzypczak-Pietraszek, A. Urbanska, P. Zmudzki, J. Pietraszek, Elicitation with methyl jasmonate combined with cultivation in the Plantform™ temporary immersion bioreactor highly increases the accumulation of selected centellosides and phenolics in Centella asiatica (L.) Urban shoot culture. Engineering in Life Sciences. 19 (2019) 931-943. https://doi.org/10.1002/elsc.201900051
[21] T. Styrylska, J. Pietraszek, Numerical modeling of non-steady-state temperature-fields with supplementary data. ZAMM 72 (1992) T537-T539.
[22] J. Pietraszek, E. Skrzypczak-Pietraszek, The optimization of the technological process with the fuzzy regression. Adv. Mater. Res-Switz. 874 (2014) 151-155. https://doi.org/10.4028/www.scientific.net/AMR.874.151