Aremco’ Equipment Division manufactures a series of high reliability equipment for the electronics, ceramics and metallurgical industries including: (1)Screen Printers for thick-film microelectronics, liquid crystal displays, brazing, and photovoltaics; and (2) Furnaces for heat treating, assaying and powder metallurgy.
Aremco’s advanced material division is a leader in the development and production of technical ceramics, adhesives, coatings, sealants and potting compounds for applications to 3200 ºF. These materials are used throughout industry in the design of sensors, electrical components and analytical instruments. Industries served include automotive, aerospace, chemical processing, metallurgical, power generation and semiconductor.
Aremco’s Crystalbond and Wafer-Mount adhesives are ideal materials for temporarily mounting products that require dicing, polishing, and other machining processes. These adhesives exhibit high bond strength and adhere readily to metals, glass and ceramics. When processing is complete, reheating and cleaning with one of Aremco’s environmentally friendly cleaning agents removes these adhesives.
DataPhysics Instruments GmbH was founded in 1997 in Filderstadt, Southern Germany. As a medium-sized, international company we are developing, manufacturing and distributing innovative contact angle measuring devices, tensiometers humidity generators and instruments for characterising disperse material systems.
In many diverse engineering applications the ability of liquids to wet solids affects the quality of the finished products and the integrity/reproducibility of the manufacturing processes. Some important examples of this are the production and application of paints and varnishes, the development and the optimisation of composite materials, the use of adhesives and selection of solvents for engineering materials, and the biocompatibility of medical implants. Reliable analytical data is provided via the precise evaluation of static and dynamic contact angles, the surface free energy of solids and the surface and interfacial tension of liquids. Last but not least, the recent, rapid, advancements in nanotechnology and biotechnology have been possible, only, through an exact knowledge of wetting processes in the sub-microscopic level.
All over the world we are recognized as a responsive, empathetic and reliable partner for customers in a wide range of application fields of research, development and industry, always following the goal of being at the forefront of this fast developing science.
In order to create and improve solutions for surface and interfacial characterisation we work tirelessly and continuously in cooperation with many famous institutes. Due to our wide accessory range we are able to satisfy specific customer requirements and give each device an individual design.
DFD INSTRUMENTS develop, design and manufacture the PAT adhesion testers, which are high precision pull-off type measuring instruments for adhesion and bond strength testing of all types of films, coatings, laminates, adhesives, metals and other materials. The adhesion testing technology, based on the concept Dynamic Force Distribution, ensures completely reproducible test results regardless of the testing circumstances like e.g. the shape of the substrate. Also, with this test equipment laboratory results are always comparable with field test results. The unique design of PAT ensures total test reliability: The test results are not operator-dependent. The testing machines are supplied with attachments ranging from the 1 kN micro-adhesion tester (typically for testing on very small components or areas) up to the fully automatic 80kN tester (mainly used for metal coatings). The equipment is either manually operated or fully automatic. Logging and storing of the test results can be done with the Windows-based digital testing module.
The equipment is fabricated by DFD in Norway (at Kristiansand; contact: email@example.com) and sold via DFD-UK.
Concrete Materials & Coatings
Read & Bridges
EAG’s analytical expertise is what enables us to help our clients to meet their goals. Our on-demand analytical testing services can help streamline R&D, solve urgent problems during manufacturing and help resolve materials related issues in the global supply chain, both within and between organizations.
Adhesion & Bonding
Materials Characterization & Surface Analysis
Morphology & Topography
Process Development & Process Monitoring
Thin Film Analysis
Trace Element Analysis
Labthink is a multinational technology company that is devoted to helping customers succeed, employees grow and brands gain respect. The headquarters of Labthink is in Jinan, China; its international headquarters is in Boston, USA; and its SAC IT Center is in Hong Kong, China. The company has more than 50 international distributors and more than 30 international service providers.
Labthink has taken the lead in proposing and drafting more than 10 national standards and has been granted more than 100 patents. Those standards and patents range from property testing for plastics, transmission methods for original data generated in testing to business mode for third-party laboratories and many other advanced technological and business areas.
select a test application to learn the relevant products
Automotive Non-metal Materials
Boxes & Cartons
Building Waterproofing Materials
Films & Foils
OLED Monitor Films
Paper & Paper Board
Solar Back Sheet
Textile & Fabric
Lydon Oven Company designs and fabricates Lab, R&D and QA Ovens for plastics, pharmaceutical and electronic applications.
Fiber Curing Ovens
PTFE Sintering Ovens
Resin Drying Ovens
Rubber Curing Ovens
Sheet Forming Ovens
Adhesive Curing Ovens
Circuit Board Curing/Drying
Environmental Test Chambers
Master Bond will custom formulate products with specific performance properties to meet unique application requirements. This may include the redesign of an existing product or the development of a new composition. We also offer replacements for competitors’ discontinued products.
Master Bond can adjust an adhesive’s properties to ensure optimal performance for your application. Our compounds can be reformulated to enhance the following properties:
Resistance to high & low temperatures
Master Bond’s product line includes over 3,000 different grades of advanced formulations. We will recommend a specific grade that provides the perfect solution for your application needs. These products are designed to solve a variety of design, manufacturing and repair/maintenance problems. They can increase productivity, reduce waste, save energy and improve your product’s performance.
Our reliable compounds are designed to meet exact performance and processing requirements while maintaining cost efficiency. Master Bond has been formulating high performance polymer systems for over 35 years. After decades of rigorous research and testing in our top of the line facility, we have become a leading manufacturer of adhesives, sealants, coating, potting/encapsulation compounds and impregnation resins. Our product line includes:
UV Curable Systems
LED Curable Systems
Polysciences, Inc. is a leading manufacturer of specialty and fine chemicals used in research and industrial laboratories. Many of our products are used in microscopy, histology, hematology, cytology, and biotechnology disciplines. Additionally, we specialize in the manufacture of monomers, polymers, and microspheres for the pharmaceutical, medical device, and electronic industries. Our microsphere products are designed for diagnostics, research, and flow cytometry applications and support validation/QC programs for analytical instruments.
Product Categories include:
Monomers & Polymers
Microspheres & Particles
High Performance Adhesives, Coatings & Encapsulants
SANS is the leading manufacturer and supplier of static material testing instruments in China. Our machines are designed for use in Research and Quality Control to measure material’s strength and performance. With SANS equipment it is possible to study the properties of metals, polymers, textiles, rubbers, adhesives and finished components. SANS machines are capable of performing a full spectrum of material tests, including tension, shear, compression, flex/bend, puncture/burst, tear, peel, melt flow, Charpy and Izod impact, heat distortion temperature, Vicat penetration and torsion. All tests are designed and implemented by SANS in accordance with key international testing standards such as ISO, ASTM, EN and other equivalents.
Universal Testing Machine
Compression Testing Machine
Pendulum Impact Tester
Drop Weight Impact Tester
Rebar Bending Testing Machine
Ring Stiffness Testing Machine
Torsion Testing Machine
High Temperature Creep Testing Machine
HDT&VICAT Testing Machine
Melt Flow Indexer
Pipe Pressure Testing Machine
Specimen Preparation Machine
ScyTek Laboratories, Inc. manufactures reagents and kits for the Life Sciences Laboratory (Immunology, Pathology, Histology, Cytology, Hematology and others).ScyTek Laboratories, Inc. is specialized teams have been solving complex problems in R&D, Formulation, Manufacturing, Vialing, Kit Assembly, Scheduling, Inventory, and Distribution for over 10 years. Our quality standards, service, and turnaround times are the best in the business. Our ability to customize with speed and flexibility will save you money in start-up, growth, and/or established market lines.We manufacture, fill, warehouse, and/or ship to your specifications. Even our QC is catered to your environment. ScyTek makes your needs a reality.