Titanate Based Ceramic Dielectric Materials

$125.00

The book presents research results concerning the electron density distribution in a number of doped barium titanate ceramic materials using experimental X-ray diffraction data, UV-visible spectrophotometry (UV-vis), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The analysis of interatomic bonding and electron density distribution is important for predicting the properties of potentially important materials and has previously been lacking for the materials studied.

$125.00
$125.00

Titanate Based Ceramic Dielectric Materials
R. Saravanan
Materials Research Foundations Volume 25
Publication Date 2018, 168 Pages
Print ISBN 978-1-945291-54-8 (release date February 25th, 2018)
ePDF ISBN 978-1-945291-55-5
DOI: 10.21741/9781945291555

Barium titanate is one of the most important electronic materials; due to its high permittivity, low dielectric loss and high tunability. The environment friendly material is suitable for microphones and microwave device applications such as tunable capacitors, delay lines, filters, resonators and phase shifters.
Doped titanates are extensively used for various electronic devices, such as transducers, piezoelectric actuators, passive memory storage devices, dynamic random access memory (DRAM), multilayer ceramic capacitors (MLCCs), positive temperature coefficient resistors (PTCR), optoelectronic devices and infrared sensors.
The book presents research results concerning the electron density distribution in a number of doped barium titanate ceramic materials using experimental X-ray diffraction data, UV-visible spectrophotometry (UV-vis), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The analysis of interatomic bonding and electron density distribution is important for predicting the properties of potentially important materials and has previously been lacking for the materials studied.

Keywords
Barium Titanate, Barium Titanate Doping, Dielectric Ceramics, Permittivity, Tunability, Transducers, Piezoelectric Actuators, Memory Storage Devices, Multilayer Ceramic Capacitors, Optoelectronic Devices, X-Ray Diffraction Data, UV-Visible Spectrophotometry, Energy Dispersive X-Ray Spectroscopy, Interatomic Bonding, Electron Density Distribution, Ceramic Property Predictions.

paperback flyer eBook flyer

ProtoView by Ringgold Clean Data
Saravanan (physics, Madura College) investigates the electronic structure, chemical bonding, and electron density distribution of five doped barium titanate lead-free dielectric ceramic materials with various dopant compositions. The experiments analyze the effect of dopants on structural modification, average gain size, optical band gap variation, chemical composition, and morphological changes. Black and white images and color drawings are provided. Annotation ©2018 Ringgold Inc. Portland, OR (protoview.com)

Ringgold Keywords
Optical band gap, Barium titanate, Doped ceramics, Perovskite ceramics, Doped titanates

About the Editors

Dr Ramachandran Saravanan, has been associated with the Department of Physics, The Madura College, affiliated with the Madurai Kamaraj University, Madurai, Tamil Nadu, India from the year 2000. He is the head of the Research Centre and PG department of Physics. He worked as a research associate during 1998 at the Institute of Materials Research, Tohoku University, Sendai, Japan and then as a visiting researcher at Centre for Interdisciplinary Research, Tohoku University, Sendai, Japan up to 2000.

Earlier, he was awarded the Senior Research Fellowship by CSIR, New Delhi, India, during Mar. 1991 – Feb.1993; awarded Research Associateship by CSIR, New Delhi, during 1994 – 1997. Then, he was awarded a Research Associateship again by CSIR, New Delhi, during 1997- 1998. Later he was awarded the Matsumae International Foundation Fellowship in1998 (Japan) for doing research at a Japanese Research Institute (not availed by him due to the simultaneous occurrence of other Japanese employment).

He has guided eleven Ph.D. scholars as of 2017, and about five researchers are working under his guidance on various research topics in materials science, crystallography and condensed matter physics. He has published around 140 research articles in reputed Journals, mostly International, apart from around 50 presentations in conferences, seminars and symposia. He has also guided around 60 M.Phil. scholars and an equal number of PG students for their projects. He has attracted government funding in India, in the form of Research Projects. He has completed two CSIR (Council of Scientific and Industrial Research, Govt. of India), one UGC (University Grants Commission, India) and one DRDO (Defense Research and Development Organization, India) research projects successfully and is proposing various projects to Government funding agencies like CSIR, UGC and DST.

He has written 8 books in the form of research monographs including; “Experimental Charge Density – Semiconductors, oxides and fluorides” (ISBN-13: 978-3-8383-8816-8; ISBN-10:3-8383-8816-X), “Experimental Charge Density – Dilute Magnetic Semiconducting (DMS) materials” (ISBN-13: 978-3-8383-9666-8; ISBN-10: 3-8383-9666-9) and “Metal and Alloy Bonding – An Experimental Analysis” (ISBN -13: 978-1-4471-2203-6). He has committed to write several books in the near future.

His expertise includes various experimental activities in crystal growth, materials science, crystallographic, condensed matter physics techniques and tools as in slow evaporation, gel, high temperature melt growth, Bridgman methods, CZ Growth, high vacuum sealing etc. He and his group are familiar with various equipment such as: different types of cameras; Laue, oscillation, powder, precession cameras; Manual 4-circle X-ray diffractometer, Rigaku 4-circle automatic single crystal diffractometer, AFC-5R and AFC-7R automatic single crystal diffractometers, CAD-4 automatic single crystal diffractometer, crystal pulling instruments, and other crystallographic, material science related instruments. He and his group have sound computational capabilities on different types of computers such as: IBM – PC, Cyber180/830A – Mainframe, SX-4 Supercomputing system – Mainframe. He is familiar with various kind of software related to crystallography and materials science. He has written many computer software programs himself as well. Around twenty of his programs (both DOS and GUI versions) have been included in the SINCRIS software database of the International Union of Crystallography.