3D Imaging

10215 Timber Ridge Dr., Ashland, VA 23005, USA
Anton Paar TriTec SA (previously CSM Instruments) has been leader in the development of instruments for surface mechanical properties characterization for over 30 years in both research and industrial fields.

Compression Presses

Anton Paar TriTec SA (previously CSM Instruments) has been leader in the development of instruments for surface mechanical properties characterization for over 30 years in both research and industrial fields.
CSM Instruments develops, manufactures and sells instruments to characterize mechanical properties of surfaces. We have been the world leader in this market for more than 30 years, first under the name of LSRH then CSEM.
CSM Instruments provides equipment that allows the mechanical characterization of a wide range of surfaces and bulk materials. Adhesion of paints, optical thin films or hard coatings can be defined using one of our Scratch Testers. These span the nano to the macro range to analyze the widest range of materials. Dynamic testing measurements can be performed to define not only the hardness of the material, but also to evaluate the plastic and elastic deformation, the elasticity module, creep and much more. For wear testing we offer the Tribometer, based on the pin-on-disc principle that operates both in the Micro and Nano regime; to record the frictional coefficient and measure the wear volume. Other equipment measures film thickness. Additionally, CSM provides three dimensional viewing capabilities of sample surfaces under most testing regimes.

Products
Indentation Testers
Scratch Test
Tribometer
Coating Thickness by Calotest
3D Imaging
Horology

http://www.csm-instruments.com/en/