Ultrasonic Technology

Fritsch GmbH, Idar-Oberstein, Germany
Industriestrasse 8, 55743 Idar-Oberstein, Germany

Fritsch is an internationally respected manufacturer of application-oriented laboratory instruments. Our instruments have been used for decades worldwide for Sample Preparation and Particle Sizing in industry and research laboratories. Trust FRITSCH quality made in Germany, our experience and our service.

Particle Sizing:
Static Light Scattering and Dynamic Image Analysis.

Sample Preparation:
Since many decades FRITSCH laboratory instruments for sample preparation convince with comfort, dependability and precision: Milling, Sieving or Dividing with FRITSCH Quality and FRITSCH Service.
Planetary Mills
Ball Mills
Cutting Mills
Rotor- / Beater Mills
Jaw Crushers
Disk Mills
Mortar Grinder
Vibratory Sieve Shakers
Sample Dividers
Vibratory Feeders
Ultrasonic Cleaners

USA-Address:
Fritsch Milling and Sizing Inc., 57 Grant Drive, Suite G, NC 27312 – Pittsboro, Phone: 001 919 229 0599

www.fritsch.de/en
James Instruments Inc., Chicago IL, USA
3727 N. Kedzie Avenue, Chicago, IL 60618 – 4545, USA

James Instruments Inc. specialises in Non-Destructive Testing equipment for concrete and other construction materials. Central to the improvement of the construction infrastructure are tools that evaluate the condition of existing construction. Destructive and Non-Destructive Testing (NDT) techniques are applied. Destructive tests can provide direct information, but are relatively expensive, time-consuming and cause damage to the structure. Destructive test results often cannot be evaluated using statistical approaches because the number of locations in the structure that can be tested without damage to the structure is limited. On the other hand, Non-Destructive Testing (NDT) techniques are relatively inexpensive to apply, and they can detect, localize, and characterize flaws and damage in concrete, wood and other construction material structures without leaving any undesirable discontinuities or causing damage to concrete members.

James Instruments Inc. is a leading manufacturer of non-destructive test equipment for construction materials. Specifically we design, manufacture and sell the most advanced equipment to test concrete, ceramic, wood, masonry, mortar, gypsum and other coarse grained materials. We supply the instruments that: measure strength, both compressive and tensile, locate rebar and other objects in concrete and masonry, determine density and analyze materials ultrasonically, analyze corrosion and, finally, determine moisture in concrete and other construction materials. And more. James Instruments Inc. — rugged, quality equipment for field use — backed by factory service and an ongoing program of research and development.

Products:
Strength Testing
Rebar Locators
Ultrasonic Testing
Corrosion Testing
Moisture Testing

Materials Tested:
Concrete
Mortar
Brick
Wood
Gypsum/Drywall
Ceramic
Paper

www.ndtjames.com
MTI Instruments Inc., Albany NY, USA
325 Washington Avenue Extension, Albany, NY 12205-5505, USA

MTI Instruments is a worldwide supplier of precision non-contact physical measurement solutions, condition based monitoring systems, portable balancing equipment and semiconductor wafer inspection tools. MTI Instrumen’s’ products use a comprehensive array of technologies to solve complex real world applications in numerous industries including manufacturing, semiconductor, commercial/military aviation, automotive and data storage.

Our products offer non contact measurement to determine tire tread depth, disk and rotor run out, wafer flatness and characterization, weld and seam tracking, ultrasonic horn vibration, robotic laser inspection, and many more applications. When it comes to electronic gauging instruments for position, displacement and vibration applications within the design, manufacturing/production, QA/ QC test and research markets; semiconductor products for wafer characterization of semi-insulating and semi-conducting wafers; and engine balancing and vibration analysis for both military and commercial aircraft, MTI Instruments has the right tools for you.

MTI Instruments is very proud of the crucial role it played with many of the world’s largest companies whether it’s in basic research, improved efficiency during production or quality control by offering solutions directly to the end-user or an embedded technology for leading OEM suppliers. Whatever you touch has probably been measured by MTI Instruments.

Technology:
Laser Sensor
Fiber Optic Measurement
Capacitance Measurement

Products:
Precision Measurement Instruments: Displacement/Vibration/Position Sensors.
Tensile, Compression and Bend Testing Machines.
Semiconductors and Solar Metrology Systems.
Aviation & Industrial Vibration/Balancing Measurement Systems.

www.mtiinstruments.com
Claim This Listing

Please login in order to be able to claim this listing.

Baugh & Weedon  Ltd, Hereford, UK
Park Tillington Road, Hereford HR4 9QJ, UK

Baugh & Weedon is a leading manufacturer of Magnetic Particle Inspection (MPI) Benches and Liquid Penetrant Inspection (LPI) Penetrant Lines. Baugh & Weedon can also provide MT accessories including UV Lamps, dual UV and white light Inspection Lamps (Lumazon) and our dual UV and White Light Meter (LumaCheck) as well as a full range of MPI and LPI chemicals from Pfinder Chemie. You name it, we have it for all your Magnetic Particle Inspection and Liquid Penetrant Inspection needs.
Baugh & Weedon also have a wide range of Ultrasonic (UT) Thickness Gauges, EMAT Flaw Detectors, UT Flaw Detectors, Ultrasonic Wall Crawlers, Hollow Rail Axle Inspection Sytems, UT Immersion Tanks, Eddy Current (ECT) Sorting Bridges, Gamma Ray and X Ray Pipeline Crawlers.
Established in 1967, Baugh & Weedon has a long history of supplying the NDT industry with high quality products and services. Based in the UK and with a wealth of industry knowledge, we strive to be client focussed at all times, working with you to find the right solution for your NDT needs.
Products by Methods
Magnetic Particle Inspection MPI
Liquid Penetrant Inspection LPI
Ultrasonics UT
Magnetic Flux Leakage MFL

http://bw-nde.com/
Claim This Listing

Please login in order to be able to claim this listing.

Beijing TIME High Technology, Beijing, China
28# Shangdi West Road, Haidian, District, Beijing City, 100085, China

Beijing TIME High Technology Company is a testing instrument manufacturer, located in China. Our company is a wholly owned subsidiary of TIME Group Inc., founded in 1984. We have a long history of manufacturing portable hardness testers. In fact, we produced the first Leeb hardness tester in China. As a result of our focus on expanding our product range, we are now able to provide a wide range of products to perform many material test, measurement, and quality control tasks, including our portable hardness tester, surface roughness tester, ultrasonic thickness tester, and coating thickness tester. In addition, other products such as the ultrasonic flaw detector, X-ray generator, and concrete testing gauge are also available.

Product Categories:
Portable Hardness Tester: Leeb Hardness Tester, Shore Durometer, Ultrasonic Hardness Tester
Roughness Tester
Ultrasonic Thickness Gauge
Coating Thickness Gauge
Vibration Tester
Endoscope
Ultrasonic Flaw Detector
Bench Hardness Tester: Vickers Hardness Tester, Rockwell Hardness Tester, Brinell Hardness Tester
Concrete Testing Gauge

http://www.tgindt.com/
Claim This Listing

Please login in order to be able to claim this listing.

Branson Ultrasonics, Danbury CT , USA
41 Eagle Road, Danbury, CT 06810, USA

Branson is well known for its Ultrasonic Cleaning Baths.

The Bransonic® CPXH digital bath is our most advanced ultrasonic bath yet. It features the benefits of heated cleaning with the ability to set temperatures from 20°C/68°F – 69°C/156.2°F. Plus, you get complete digital control with programmable capabilities and self-adaptive technology for consistent, worry-free operation – every time. All Bransonic® baths can also be used for cell separation, sample preparation and degassing of liquids.

With the Bransonic® CPX, we’ve gone digital and defined a new category in ultrasonic baths. We’ve re-imagined our iconic line of ultrasonic baths for total control with a fully digital Tower Control Panel. The CPX also features our new self-adaptive technology that actively tracks and adapts to changes within the bath. All Bransonic® baths can also be used for cell separation, sample preparation and degassing of liquids.

https://www.bransonic.com/
Claim This Listing

Please login in order to be able to claim this listing.

Centurion NDT, Streamwood IL,  USA
1400 Yorkshire Drive, Streamwood, IL 60107, USA

Centurion NDT, established in 1992, designs, manufactures and services a line of portable eddy current and ultrasonic test instrumentation.

Eddy current instruments such as the Model ED-520 and the FM-140 are well known in the industry and have been written into many aviation specifications. When testing high pressure aluminum cylinders, the Visual Eddy Test System is the only instrument on the market to accurately differentiate critical cracks.

All instruments in the product line are engineered, manufactured and serviced in Streamwood, Illinois. Centurion NDT’s business philosophy is to supply reliable, well engineered test instruments which are easy to use and economical to own.

www.centurionndt.com
Claim This Listing

Please login in order to be able to claim this listing.

Hielscher Ultrasonics GmbH, Teltow, Germany
Warthestrasse 21, Teltow, D-14513, Germany

Hielscher Ultrasonics specializes in the design and manufacturing of high power ultrasonic homogenizers for lab, bench-top and production level. Ultrasonic power is an effective and energy-efficient means to apply high shear and intense stress to liquids, powder/liquid mixtures and slurries. This makes it a strong alternative to high shear mixers, high pressure homogenizers and agitated bead mills.Hielscher ultrasonic devices are in use worldwide as laboratory mixers, high shear mixing equipment, full-size in-line homogenizers or particle mills. The applications span mixing, dispersing, particle size reduction, extraction and chemical reactions.

Hielscher ultrasonic devices are used in the synthesis of nanomaterials as well as in the formulation of compounds and composites containing nanomaterials. This includes the use of ultrasonics during precipitation and the deagglomeration of nano-size materials, like metal oxides or carbon nanotubes.

Ultrasound is used in the formulation of paints and coatings for: emulsification of polymers dispersing and fine milling of pigments size reduction of .

Ultrasonic cleaning is an environmentally friendly alternative for the cleaning of continuous materials, such as wire and cable, tape or tubes. The effect of the cavitation generated by the ultrasonic power removes lubrication residues like oil or grease, soaps, stearates or dust.

http://www.hielscher.com/
Claim This Listing

Please login in order to be able to claim this listing.

Hielscher USA, Inc., Ringwood NJ, USA
19, Forest Road, Ringwood, NJ 07456, USA

Hielscher Ultrasonics specializes in the design and manufacturing of high power ultrasonic homogenizers for lab, bench-top and production level. Ultrasonic power is an effective and energy-efficient means to apply high shear and intense stress to liquids, powder/liquid mixtures and slurries. This makes it a strong alternative to high shear mixers, high pressure homogenizers and agitated bead mills.Hielscher ultrasonic devices are in use worldwide as laboratory mixers, high shear mixing equipment, full-size in-line homogenizers or particle mills. The applications span mixing, dispersing, particle size reduction, extraction and chemical reactions.

Hielscher ultrasonic devices are used in the synthesis of nanomaterials as well as in the formulation of compounds and composites containing nanomaterials. This includes the use of ultrasonics during precipitation and the deagglomeration of nano-size materials, like metal oxides or carbon nanotubes.

Ultrasound is used in the formulation of paints and coatings for: emulsification of polymers dispersing and fine milling of pigments size reduction of .

Ultrasonic cleaning is an environmentally friendly alternative for the cleaning of continuous materials, such as wire and cable, tape or tubes. The effect of the cavitation generated by the ultrasonic power removes lubrication residues like oil or grease, soaps, stearates or dust.

http://www.hielscher.com/lab.htm
Claim This Listing

Please login in order to be able to claim this listing.

Imaginant, Pittsford NY, USA
3800 Monroe Avenue, Pittsford, NY 14534, USA

Imaginant designs, develops, and manufactures high quality, high-resolution color digital cameras for some of the best-known and most respected imaging companies in the world, including Eastman Kodak Company. Our high-resolution color capture instruments are found in many of the best-known theme parks throughout the world. The Digital Camera team actively seeks OEM customers who require the finest engineered cameras for use in a variety of imaging-critical applications. Our products fit particularly well into a number of imaging segments, including aerial, machine vision, medical, microscopy, military, professional, surveillance, and scientific.

Pulser/Receivers
JSR Ultrasonics high frequency pulser/receivers are at the heart of advanced nondestructive testing systems used throughout the world. Our company has driven pulser/receiver technology with its development of remote pulsers. Our leadership continues with the DPR500, the first dual-channel modular pulser/receiver. From traditional metals to 21st century microelectronics, JSR Ultrasonics has a thorough understanding of the science as well as the art of nondestructive testing. We are committed to expanding our role as the innovative leader in the engineering and manufacture of ultrasonic instrumentation for nondestructive testing.
Coating Thickness Systems
PELT(tm) coating thickness systems are internationally recognized for precise multi-layer gauging of coatings on both non-metallic and metallic substrates.

http://www.jsrultrasonics.com/